AT713 Matt Nuclear Tape General Description A polythene extruded matt cloth tape coated with an aggressive, white pressure sensitive, solvent free rubber-resin adhesive. • Matt finish • Easy tear • Conformable to awkward shapes • Strong • Water resistant finish • Good abrasion resistance • Non-corrosive adhesive • Clean peel Technical Details Typical Values Thickness Breaking Load Elongation Adhesion Steel Self Moisture Vapour Permeability NOTE Except where indicated otherwise, the figures stated are average values and should not be regarded as MAXIMUM or MINIMUM values for specification purposes. The Company reserves the right to improve products and any change in specification will result in a re-issue of the relevant ‘Technical Data Sheet’. Customers should satisfy themselves that the tape is suitable for their requirements whether after such modifications or otherwise. Please check that you have the latest issue of the ‘Technical Data Sheet’. All slitting and length tolerances are to British Standards. Before use the customer is advised to consult the Health & Safety Data Sheet produced by the company for this product, which is available on request. STORAGE Tapes stored below the minimum recommended temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place. Total Halides Total Sulphur RoHS compliant Service Temperature Application Temperature Storage Temperature o> ADVANCE AFERA Association des Fabricants Europeens de Rubans Auto-Adhesifs. Adding more to adhesive tape Advance Tapes International Limited Westmoreland Avenue Thurmaston Leicester LE4 8PH England