Catalogs >
Advance Tapes >
AT712 Nuclear Tape

AT712 Nuclear Tape
1Pages

Catalog excerpts

AT712 Nuclear Tape General Description A polythene extruded gloss cloth tape coated with an aggressive, white pressure sensitive, solvent free rubber-resin adhesive. • Low halogen content • Very easy tear • Clean peel • pH neutral • Water resistant finish • Good abrasion resistance • Conformable to awkward shapes • Non-corrosive adhesive Specification Certification* to the following standards may be available on request. • NNC approved (White only). • EDF PMUC approved (White only). Technical Details Typical Values Thickness 0.27mm Moisture Vapour Permeability Total Halides Total Sulphur NOTE Except where indicated otherwise, the figures stated are average values and should not be regarded as MAXIMUM or MINIMUM values for specification purposes. The Company reserves the right to improve products and any change in specification will result in a re-issue of the relevant ‘Technical Data Sheet’. Customers should satisfy themselves that the tape is suitable for their requirements whether after such modifications or otherwise. Please check that you have the latest issue of the ‘Technical Data Sheet’. All slitting and length tolerances are to British Standards. Before use the customer is advised to consult the Health & Safety Data Sheet produced by the company for this product, which is available on request. STORAGE Tapes stored below the minimum recommended temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place. Breaking Load Elongation Adhesion Steel Self RoHS compliant Service Temperature Application Temperature Storage Temperature 'Standard charge for certificate: £25.00. AFERA Association des Fabricants Europeens de Rubans Auto-Adhesifs. Adding more to adhesive tape Advance Tapes International Limited Westmoreland Avenue Thurmaston Leicester LE4 8PH vat no. ns-6143-00

Open the catalog to page 1