Version 5 AT6200 Orange Building Tape General Description An orange polycloth laminate gloss tape coated with an aggressive pressure sensitive, solvent free rubber-resin adhesive. • Highly visible • Easy unwind and tear • Water resistant finish • Good abrasion resistance • Conformable to awkward shapes • Non-corrosive adhesive • Strong Technical Details Typical Values Thickness 0.22mm Breaking Load Elongation Adhesion Steel Self Moisture Vapour Permeability RoHS compliant Service Temperature NOTE Except where indicated otherwise, the figures stated are average values and should not be regarded as MAXIMUM or MINIMUM values for specification purposes. The Company reserves the right to improve products and any change in specification will result in a re-issue of the relevant ‘Technical Data Sheet’. Customers should satisfy themselves that the tape is suitable for their requirements whether after such modifications or otherwise. Please check that you have the latest issue of the ‘Technical Data Sheet’. All slitting and length tolerances are to British Standards. Before use the customer is advised to consult the Health & Safety Data Sheet produced by the company for this product, which is available on request. STORAGE Tapes stored below the minimum recommended temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place. AFERA Association des Fabricants Europeens de Rubans Auto-Adhesifs. Adding more to adhesive tape >gistered in England No. 929843 t No. 115-6143-00 Advance Tapes International Limited Westmoreland Avenue Thurmaston Leicester LE4 8PH England