AT5

AT5

Product catalog summary
General Description
A PVC tape with a clear, crosslinked, solvent-based rubber-resin adhesive. It is water-resistant, has good abrasion and UV resistance, is non-corrosive, suitable for outdoor use, has low stretch, and provides good instant adhesion.
Technical Details
  • Thickness: 0.12mm
  • Breaking Load: 23 N/cm
  • Elongation: 130%
  • Adhesion to Steel: 1.7 N/cm
  • Adhesion to Self: 1.6 N/cm
  • Moisture Vapour Permeability: 40g/m²/24hrs
  • RoHS Compliant: Yes
  • Service Temperature: 0°C to +70°C
  • Application Temperature: +5°C to +40°C
  • Storage Temperature: +12°C to +25°C
Note
Figures are typical values and not to be considered as maximum or minimum for specifications. The company may improve products, and any specification changes will result in a re-issue of the technical data sheet. Customers should ensure the tape meets their requirements and consult the Health & Safety Information Sheet before use.
Storage
Tapes stored below the recommended temperature need warming up to that level before use, which may take up to 24 hours.
AFERA
Association des Fabricants Européens de Rubans Auto-Adhésifs.
See more

Catalog excerpts

AT5-1

TECHNICAL DATA ______________________________________________________________________________ General Description A PVC tape coated with a clear, crosslinked, solvent based rubber–resin adhesive. • • • • • • • Water resistant Good abrasion resistance Very good UV resistance Non-corrosive adhesive Can be used outdoors Low stretch Good instant stick Technical Details Typical Values Breaking Load Adhesion Steel Moisture Vapour Permeability RoHS Compliant Service Temperature Application Temperature Storage Temperature NOTE Except where indicated otherwise, the figures stated are typical values and should not be regarded as MAXIMUM or MINIMUM values for specification purposes. The Company reserves the right to improve products and any change in specification will result in a re-issue of the relevant ‘Technical Data Sheet’. Customers should satisfy themselves that the tape is suitable for their requirements whether after such modifications or otherwise. Please check that you have the latest issue of the ‘Technical Data Sheet’. All slitting and length tolerances are to British Standards. Before use the customer is advised to consult the Health & Safety Information Sheet produced by the company for this product, which is available on request. STORAGE Tapes stored below the minimum recommended temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place. AFERA Association des Fabricants Europ

 Open the catalog to page 1

All Advance Tapes catalogs and technical brochures

  1. AT20

    1  Page

  2. AT10

    1  Page

  3. AT8H

    1  Page

  4. AT7

    1  Page

  5. AT4

    1  Page

  6. AT4004

    1  Page

  7. AT324

    1  Page

  8. AT6160

    1  Page

  9. AT205

    1  Page

  10. AT8

    1  Page

  11. AT6200-ATI

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.