Tapes Range adhesive tapes

Advance Tapes International Limited is a company that has always sought to understand exactly what its customers want and then set out to provide it. Since Advance Tapes was founded in 1964, the company has gone on to become one of Europe’s leading independent manufacturers of adhesive tapes, supplying products to a wide range of industries and specialist distributors. The company has been fortunate in that time to employ a diverse and imaginative workforce that has helped Advance develop a range of products, methods of production, marketing and distribution that have kept the company at the...

Service Standards The need for a high quality of service is recognised as vital by Advance Tapes. Advance demand it internally of its staff and from its suppliers. Consequently, Advance is able to offer its customers a high level of service that is consistent across its sales territories. One of the key objectives for Advance Tapes is customer satisfaction, in fact all Advance's support processes and its business strategy are geared towards achieving improving levels of customer satisfaction. It will come as no surprise that the service you receive, whichever department you deal with, will be...

Filmic Tapes The term ‘filmic tapes’ covers a broad spectrum of carriers which includes PVC and polyethylene. Filmic tapes do look alike but they all have individual differences that make them ideally suited to specific applications. To help you make an informed decision about what tape to choose for your application, follow the guidelines below and throughout this brochure. All Filmic tapes: • Will peel clean from most surfaces. • Have a writable surface except for AT6000 which has a silicone coating. • Have some degree of electrical insulation due to the polymers present in the tape’s manufacture....

AT7 PVC Electrical Insulation Tape AT7 • Technical Data Thickness 0.13mm Breaking load 26 N/cm Elongation 180% Adhesion Steel 2.4 N/cm Self 2.1 N/cm Service temp -5˚C to +70˚C Breakdown 8kV voltage • Flame retardant and self extinguishing safe to use on electrical cables • Wide range of colours - suitable for colour coding • UV resistant BS EN 60454 IS THE STANDARD FOR PVC AND OTHER ELECTRICAL INSULATING TAPES, WHICH IS WIDELY RECOGNISED IN EUROPE. Colour coding EARTH REMAINS THE SAME EARTH REMAINS THE SAME • Colour coding and insulation of electrical cabling • Masking off during chemical and...

AT8H Hazard Warning Tape AT8H • Technical Data Thickness 0.14mm Breaking load 26 N/cm Elongation 150% Adhesion Steel 3.5 N/cm Self 2.5 N/cm Service temp 0˚C to +60˚C • Very high adhesion level - adheres well long term to rough surfaces • Low stretch - will not lift once applied • Good abrasion resistance - stands up well to foot and machinery traffic • Can be walked on immediately after application TIP All traffic and routes shall be suitably indicated where necessary for reasons of Health and Safety. (Extract from Management of Health and Safety at Work 1992) AT9 PVC Duct Sealing Tape AT9 •...

AT20 PVC Extra Heavy Duty Pipewrap Tape AT20 • Technical Data Thickness 0.44mm Breaking load 90 N/cm Elongation 200% Adhesion Steel 3.0 N/cm Self 2.6 N/cm Service temp +5˚C to +80˚C • Corrosion and abrasion protection for pipework above or under ground • Very high abrasion resistance • Flame retardant • UV resistant AT27 Translucent Repair Tape AT27 • Technical Data Thickness 0.15mm Breaking load 26 N/cm Elongation 130% Adhesion Steel 3.5 N/cm Self 2.8 N/cm Service temp 0˚C to +70˚C • Translucent, non reflective surface for ‘invisible’ repair and protection • UV resistant CO NF OR MS TO BS 38...

AT42 PVC Vapour Barrier/Protection Tape AT42 • Technical Data Thickness 0.11mm Breaking load 19 N/cm Elongation 170% Adhesion Steel 1.6 N/cm Self 1.0 N/cm Service temp -5˚C to +50˚C • Good instant stick - grabs well to a variety of surfaces • Water resistant AT43 Translucent PVC Low Tack Protection Tape AT43 • Technical Data Thickness 0.15mm Breaking load 26 N/cm Elongation 130% Adhesion Steel 0.5 N/cm Service temp 0˚C to +60˚C • Translucent finish - ideal for being able to see the finished part being protected • Clean peel • Low tack AT44 Low Tack PVC Protection Tape AT44 • Technical Data Thickness...

AT66 PVC Protection Tape AT66 • Technical Data Thickness 0.13mm Breaking load 26 N/cm Elongation 140% Adhesion Steel 1.7 N/cm Self 1.7 N/cm Service temp -5˚C to +60˚C • Can be removed cleanly up to four weeks after application • Good low temperature resistance • UV resistant • Low stretch • Masking off and protection during decorating and renovation • Protection of surfaces during manufacturing process in the automotive industry AT68 Ribbed PVC Protection Tape AT68 • Technical Data Thickness 0.15mm Breaking load 21 N/cm Elongation 100% Adhesion Steel 1.7 N/cm Self 1.6 N/cm Service temp -5˚C to...

AT79 High Performance Polyethylene Self Amalgamating Tape AT79 • Technical Data Thickness 0.75mm Breaking load 12 N/cm Elongation 600% Breakdown 34 kV/mm voltage Service temp -35˚C to +130˚C • 0.75mm thickness • 34 kV/mm breakdown voltage • Resistant to a wide range of chemicals including, alkalis, hydraulic fluids and vegetable oils • Excellent voltage resistance • Water and ozone resistant • Strong AT80 Self Bonding PVC Electrical Insulation Tape AT80 • Technical Data Thickness 0.15mm Breaking load 21 N/cm Elongation 250% Service temp -18˚C to +100˚C Easy unwind Excellent conformability to...

AT85 Polyethylene Self Amalgamating Tape AT85 • Technical Data Thickness 0.5mm Breaking load 12 N/cm Elongation 600% Breakdown 34 kV/mm voltage Service temp -35˚C to +130˚C • 0.5mm thickness • 34 kV/mm breakdown voltage • Resistant to a wide range of chemicals including, alkalis, hydraulic fluids and vegetable oils • Excellent voltage resistance • Water, ozone and UV resistant • Easy unwind • Excellent high and low temperature performance AT87 Polyisobutylene Self Amalgamating Tape AT87 • Technical Data Thickness 0.5mm Breaking load 20 N/cm Elongation 600% Breakdown 17 kV/mm voltage Service temp...