T2, T3 & 2000 S erieS r eceSSed d ock L ifTS These are by far the most popular size Disappearing Dock lifts sold. They are sized to handle pallet jacks, four-wheel carts and dolly trucks. They are also used for dock to ground access. • Was the industry standard for over 25 years. • The new industry standard for over 10 years. • Higher lifting capacities & edge loading ratings • 2” wide tube legs • 3” wide tube legs All models are equipped with a hinged bridge with a pull back chain. All of the electrical controllers are Underwriters Laboratories approved assemblies. Each unit is washed with phosphoric acid, fully primed and then finished with baked enamel. All cylinders are machine grade with clear plastic return lines & internal mechanical stops. All pressure hoses are double wire braid with JIC fittings. Reservoirs are mild steel. These units conform to all applicable ANSI codes. 4Double Wire Braid Hose 4UL Listed Control Panel Phone: 800-843-3625 • Fax: 630-584-9405 • www.advancelifts.com ©2013 Advance Lifts, Inc. All rights reserved.

Lift Capacity Platform Size Lowered Height Ship Weight S PECIFICATION TABLE Model Lift Capacity Platform Size Lowered Height Ship Weight Lift Capacity Platform Size Lowered Height Ship Weight GENERAL: All of these units are designed for use with pallet jacks, four-wheeled carts and hand trucks. Their rugged tubular construction offers more rigidity with less weight than the solid bar leg alternatives. A wide assortment of accessories for these units is available. MODEL 2400: This model was designed to fit into a typical dock leveler pit. The short platform length means the scissors legs are also...