S tandard d uty (tM, tML, tPL & tPH) t urntabLeS 10 year/250,000 Cycle Warranty Turntables are used for positioning jobs where heavy duty loads must be rotated on a regular basis. There are two basic types of standard duty turntables, non-powered and powered. Turntables are available in low profile and high profile configurations. S PECIAL F EATURES Non-powered turntable features: 4Lower cost than powered turntables. 4These units are manually rotated. 4These units can be rotated in either direction. 4All non-powered turntables are low profile. 4Standard platforms are rectangular and round platforms are optional on all models except TML. 4Rotational limits can be provided via optional detents, locking pins, and hard stops. 4TM platforms are supported by lifetime lubricated roller bearing cam followers. 4TML platforms are supported by lifetime lubricated ball bearing roller. 4Platforms rotate around a lifetime-lubricated kingpin bearing. Powered turntable features: 4Used where more frequent turning is required. 4Used where rotational effort would be too high in a non-powered turntable. 4Standard turntables use DC motors and drives; AC motors and drives are optional. 4Standard rotation is clockwise only. 4Optional bi-directional rotation (clockwise & counterclockwise) requires an AC motor and drive. 4Platforms rotate on a lifetime-lubricated kingpin bearing. 4Platform travel can be limited by use of optional limit switch (+/- 3º accuracy). 4Powered turntables are available in low profile and high profile configurations. 4Low profile powered turntables: – Use for powered applications where low platform height is important. – Circular platforms are required, rectangular platforms are not available. – Drive motor is located at the edge of the platform and projects above platform. – Platforms are supported by lifetime lubricated roller bearing cam followers. 4High profile powered turntables: – Use for powered applications where low platform height is not important. – Standard platforms are rectangular and round platforms are optional. – Drive motor is located under the platform. – Platforms are supported by inverted casters with tapered roller bearings or cam followers. Phone: 800-843-3625 • Fax: 630-584-9405 • www.advancelifts.com ©2013 Advance Lifts, Inc. All rights reserved.

S PECIFICATION TABLE F OR S TANDARD D UTY N ON -P OWERED T URNTABLES Model Edge Load Maximum Lowered Height Roller Radius Ship Weight S PECIFICATION TABLE F OR S TANDARD D UTY P OWERED H IGH P ROFILE T URNTABLES Model Edge load Maximum Lowered Height Roller Radius Phone: 800-843-3625 • Fax: 630-584-9405 • www.advancelifts.com ©2013 Advance Lifts, Inc. All rights reserved.

S PECIFICATION TABLE F OR S TANDARD D UTY P OWERED L OW P ROFILE T URNTABLES Model Edge Load Maximum Minimum Platform Maximum Platform Lowered Height Roller Radius Consult the factory for special speeds, platform sizes and capacities. OPTIONAL ROTATIONAL LIMITS FOR MANUAL TURNTABLES: DETENTS, LOCKING PINS AND HARD STOPS OPTIONAL ROTATIONAL LIMITS FOR POWERED TURNTABLES: LIMIT SWITCHES, PROXIMITY SENSORS, PRECISION CONTROL PLC 4Lifetime lubricated roller bearing wheel style of unit Phone: 800-843-3625 • Fax: 630-584-9405 • www.advancelifts.com ©2013 Advance Lifts, Inc. All rights reserved.