Material Lifts For Mezzanines
8Pages

ADVANCE MEZZANINE LIFTS RIDER LIFTS FOR MEZZANINES & AUTOMATED MATERIAL LIFTS FOR MEZZANINES ► INCREASE MEZZANINE UTILITY ► SAFER LOADING & UNLOADING ► COST EFFECTIVE ► FASTER LOADING & UNLOADING APPLICATION GUIDE

Phone: 800-843-3625 • Fax: 630-584-9405 • www.advancelifts.com ©2011 Advance Lifts, Inc. All rights reserved.

Scissors lifts have been safely moving men and material from ground level to higher elevations for more than 60 years and are an economical alternative to reciprocating conveyors and elevators with their elaborate guiding and hoisting mechanisms. Scissors lifts in general are governed by three ANSI codes: 4ANSI.MH29.1 is primarily concerned with “industrial scissors lifts”. 4ANSI/SIA A92.3 and A92.6 are primarily concerned with “mobile elevating work platforms”. All of these ANSI codes allow for riders on the platforms with proper guard rails. The writers of ANSI B20.1 Vertical...

ADVANCE MEZZANINE LIFTS BIG FRIGGIN" (BFL) SERIES LIFTS The BFL series lifts were designed for the high travel applications that also require large platforms. These lifts are designed to move multiple pallets or large loads up a floor level or to high mezzanines. These big lifts are all built with tubular steel legs to maximize the rigidity of the unit and to SPECIAL FEATURES & BENEFITS ► These units are equipped with the patented "Platform Centering Device". ► All of the controllers are assembled in our UL listed panel shop. ► These units are fully primed and finished with a baked enamel...

“BIG FRIGGIN” (BFL) SERIES LIFTS S PECIFICATION TABLE F OR BFL S ERIES L IFTS Model Lowered Height Raised Height O PTIONS : ELECTRICAL: (Note the standard control is a constant pressure pushbutton on a 10’ cord from the power unit controller.) 1. For rider units – a platform mounted constant pressure pushbutton with 20 ft. coil cord and a keyswitch maintenance override mounted on the power unit controller. 2. For no rider call send units – two (2) wall mounted three (3) button (up, down, E stop) momentary contact call/send buttons and a keyswitch maintenance override mounted on the power...

MULTI STAGE (MSL) SERIES LIFTS The MSL Series lifts were designed for the higher travel applications that require shorter platform lengths than would be available with a single scissors design. The lighter capacity units are built with solid steel legs for more compact design and greater cost savings, while the higher capacity units are built with structural tubing legs for greater rigidity, lighter weight and optimum cost savings. S PECIAL F EATURES 4 These units are equipped with the patented “Platform 4 4 4 4 4 4 Centering Devices”, which doubles or triples lift life. All of the...

M ULTI S TAGE L IFTS Maximum Loading End Side Baseframe Size Lowered Height Raised Height Consult the factory for higher speeds with larger power units, custom travels, custom platform sizes and capacities. O PTIONS : For movement between floor levels, see pages 2, 3 & 5 for necessary options. Guard and gates are not included in base prices of MSL’s. Phone: 800-843-3625 • Fax: 630-584-9405 • www.advancelifts.com ©2011 Advance Lifts, Inc. All rights reserved.

S CISSORS L IFTS A RE N OT E LEVATORS : The biggest differences between rider scissors lifts and elevators or vertical reciprocating conveyors are as follows: 1. Scissors lifts are factory assembled not field assembled from kits. Scissors lifts have no external guide rails and/or pulley mechanisms to entangle riders. All the stability and lifting is provided by the scissors lift mechanism beneath the platform. Rider scissors lifts use constant pressure push buttons which means the rider operator is in constant control. Although fixed scissor lifts under ANSI MH29.1 and the mobile elevating...