HV-LN Series • Controlled voltage mode • Controlled current mode • Over temperature protection • Over load protection • Magnetic Resonance Imaging • Power Industry Testing • Vibration Test Devices • Piezoelectric transducer driver • Vacuum tube driver • Bipolar high voltage power supply The Model LN power amplifiers offer extended output power, voltage capabilities, low distortion, versatility and the latest BJT power in the operational amplifier technology. All these performance features are not available in other power amplifiers. These power amplifiers supply the controlled voltage ( LNP ) or controlled current ( LNC ) output. In controlled voltage ( CV ) mode, the output is an amplified voltage representing the input voltage signal. In controlled current ( CC ) mode, the output is an amplified current representing the input voltage signal. If the load's impedance changes, the amplifier shall try to remain at the desired voltage (in CV) or current (in CC ).

HV-LN Series • These amplifiers provide with precise amplification of signals with frequencies from DC to over 60 kHz. Depending on the application, much higher • Maximum output voltage of 310 Vpp ( ± 155 V) ©full load. • Voltage input gain: • Voltage input offset: with 0 ~ 100% fine adjusting potentiometer • Maximum slew rate of 36 V/ u s for the LNP • Residual noise for the LNP is only 0.88 mV rms ■ CV Low noise power amplifier Order Code: ■ CC Low noise power amplifier Order Code: depending on different Models. ■ Full dot-matrix structure with 4 Row X 20 Chars dots FSTN positive, gray translucence...