Catalogs >
Advance Instrument Inc. >
7310 Dynamic Strain Gage Signal Conditioning Ampli er

7310 Dynamic Strain Gage Signal Conditioning Ampli er
2Pages

Catalog excerpts

7310 Dynamic Strain Gage Signal Conditioning Ampli er - 1

7310 Dynamic Strain Gage Signal Conditioning Amplifier Signal Conditioning • Differential signal amplifier with high bandwidth • Fully adjustable calibrated programmable gain • 4 digital LED display for gain, filter, excitation setting or output voltage •Accepts foil type strain gage, piezo resistive, • Programmable or Selectable bridge Constant- • Plug-in amplifier •Automatic bridge balance, with EEROM to preserve balance without power • Built-in with all bridge completion including 120 • Built-in with shunt calibration circuits • Built-in with optically isolated shunt calibration •Built-in with programmable or selectable four- pole Bessel low-pass filter • 10 Selectable cutoff frequencies of 10 Hz to •Front-panel monitoring: Vin, Voutand Excitation • Dynamic Material Test •Strain/Stress Analysis •Dynamic Material Elasticity Testing • SHPB Signal Conditioning • Load Cell Signal Conditioning (Foil Strain Gage Signal Conditioning iPiezo Resistive Sensor Signal Conditioning iSemiconductor Strain Gage Signal Conditioning 7310 Signal Conditioning System is designed with and incorporates all the features necessary for dynamic precise conditioning of strain gage and transducer inputs in the most severe operating environments. 7310 Signal Conditioning and amplifier's low- level signals to high-level outputs for multiple channels can be simultaneously and dynamically recorded and displayed on external devices. service© advanceinstrument.com

Open the catalog to page 1

7310 Dynamic Strain Gage Signal Conditioning Ampli er - 2

7310 Dynamic Strain Gage Signal Conditioning Amplifier • Strain gages: Quarter, half or full-bridge • Built-in 120 O and 350 0 dummy gages; ■ Transducers: Foil or piezo resistive strain gage types; DCDT displacement transducers ■ Regulation ( 0-100 mA ± 10% line change ) ± 0.05 mV ±0.004 %, max measured at remote sense points. ( Local sense: -5 mV, typical, 100 mA, measured at plug. ■ Remote sense error: 0.0005% per O of lead resistance * Level: Normally symmetrical above ground; either side may be grounded with no effect on performance. »Bridge Balance • Ranges ( Auto ranging ): ± 13000 u...

Open the catalog to page 2