Brochure Industrial WLAN - ads-tec
12Pages

IT Infrastructure WLAN 802.11 Access Points and Clients

Wireless communication – 100% made in Germany  ads-tec‘s Rugged Access Points and Clients (RAP/RAC/IWL) offer the optimum solution to a solid WLAN infrastructure in industrial environments. Avoid expensive cable routes and connect mobile participants – with WLAN components from ads-tec. The best answer to reliable network security and maximum transmission rates. 100% capacity of development is the basis of manifold values.

Rugged Access Point/Client RAP/RAC1000 series Rugged Access Client RAC2000 series Industrial Wireless LAN IWL3000 series

RAP1000 series product benefits Single or Dual Access Point Communication on several channels • Up to two WLAN cards per device are available for simultaneous provision of 802.11b/g and 802.11a/h networks, each time with the maximum transmission rate • Use in dual radio WDS systems in order to achieve higher transmission rates in distributed wireless networks Network connection  Fibre or copper • A version including a MTRJ fibreoptic connection is available for areas with strong EMC influence and with long distance connections Power supply  Integrated and rich in versions • 24 V DC •...

IT Infrastructure  RAP, RAC and IWL  product benefits RAC2000 series product benefits Seamless Roaming  Client with two WLAN modules Access Point A Client is connected with Access Point B and searches for further Access Points Seamless Roaming Client Client is connected with Access Point B and Access Point C 0 ms Rugged Access Client  Compact and rugged • Space saving design • Ideally suited for use in overhead conveyors and other conveyor equipment • IP 65 when installed • Simple and quick installation seamless change RAC2000 series  One device for all purposes • Choose between a version...

IWL3000 series product benefits Industrial Wireless LAN  IWL Access Point and Client IWL3000 series  Universally deployable • IEEE 802.11n, a/h, b/g available in one device • or 2 radio modules 2.4 and 5 GHz 1 (can be configured individually) • Rugged magnesium die-cast case IP 20 • hock- and vibration-proof, no rotating S parts • nvironmental temperature -20°C to E +70°C • 4 V multi-voltage power supply for a 2 supply voltage of 6..36 V DC • x GBit Ethernet Cu (RJ45) 10/100/1000 2 • aisy-chain cabling possible D • x USB 2.0 1 • SIM card reader fitted into the back (configuration backup)...

IT Infrastructure  RAP, RAC and IWL  product benefits VLAN tagging, QoS and prioritisation  Strictly in the right order • Machine protocols have preference • Real time Ethernet applications can easily be used in combination with VLANs • Even networks under high loads can securely convey important data thanks to the QoS feature Event log and monitoring  Always informed about what‘s going on • Password protected event log with local or remote data retrieval • Event log transmission to a SNMP server (SNMPv1, SNMPv2, SNMPv3) • Client monitoring for supervision of TCP/IP terminals IDA light...

Technical data 1 WLAN module 2 WLAN modules RAP incl. client mode 2 WLAN modules 1x Cu-RJ45 port Seamless Roaming Client* Rugged Access Client Redundant energy supply Radio modules 4x Cu-RJ45 port (switch) 1x fibre-optic Ethernet port 24 V DC Power supply PoE 48 V DC AC integrated 110/230 V Redundant energy supply Client mode WLAN Standard 2x Cu-RJ45 port 1x fibre-optic Ethernet port Client mode Power supply RAP incl. client mode Seamless Roaming Client* * Seamless Roaming Clients: From access point to access point without any packet loss or interruption of data transmission.

IT Infrastructure  RAP, RAC and IWL  technical data Hardware specification RAP1000 series Ethernet connection HOST: RJ45 (mit PoE) HOST: RJ45 100BaseTx FD 100BaseTx FD or fibre-optic (MTRJ connection), 100BaseFx Power supply 24 V DC connection, PoE (Power over Ethernet IEE802.3af), optional: 110/ 230 V AC Redundant power supply between PoE, 24 V and 110/230 V AC Power, Link, Activity WLAN & Host, PoE Power, Link, Activity WLAN & Host Power, Link, Activity WLAN, LAN1, LAN2 For storing the configuration on a SIM card Metal magnesium case die-cast, shock and vibration resistant, without any...

Basic WLAN parameters RAP1000 series Radio standards Frequency range Radio channels 13 with 802.11 b/g, 19 with 802.11a, automatic channel selection or permanently set channel Transmission 802.11b (11 MBit/s) 802.11b (11 MBit/s) bandwidth 802.11g (54 MBit/s) 802.11g (54 MBit/s) 802.11a/h (54 MBit/s) 802.11a/h (54 MBit/s) Automatic Rate Selection (ARS) or 802.11n/g (450 MBit/s) fixed rates auto-fallback 802.11n/g (900 MBit/s 2 interfaces) The Data Rates in 802.11n modes depends on the guard interval. Fully transparent bridge WDS Supports the direct connection of two Ethernet segments using...

IT Infrastructure  RAP, RAC and IWL  general data WLAN security Security modes WPA authentication WEP64, WEP128, WPA/TKIP, WPA2/CCMP (AES), WPA-PSK WPA-Radius (enterprise), 802.1x: Access Point primary and secondary radius server Access Client phase 1: EAP/TLS, EAP/PEAP, EAP/TTLS phase 2: MD5, MSCHAPv2 Other WPAs GMK and PMK rekeying interval can be configured, WP parameters M AC filter in access point mode, up to 500 MAC addresses can be configured, fast import by using the text-file upload function – Separate certificate administration for verification – Upload function for client, CA and...

The content of this product range brochure was created with utmost care. However, we shall not be held liable for the accuracy, completeness and topicality of any data and figures contained in this publication. The contents are subject to technical modification and figures may differ from reality. All product names are trademarks and registered trademarks, and as such are the property of the respective company owning trademark rights, in each case. ads-tec GmbH Raiffeisenstraße 14 70771 Leinfelden-Echterdingen Phone +49 711 45894-600 Fax +49 711 45894-992 sales@ads-tec.de www.ads-tec.de...