SINGLE USE INSULATED BOX
2Pages

INSULATED BOX Single use ADP Conseil developed a protective system for the heat-sensitive products from 48 hours to 144 hours Applications: Logistic Human and Animal health - Protection and Forwarding of heatsensitive drugs. General information: The packaging made out of polyurethane foam is intended for the protection of heatsensitive products. In the logistics of the human and animal health, they are used for the forwarding of heatsensitive drugs. Specifications: The entire range is made of polyurethane foam injected mono closed cell density 35 kg/m3 on expanded to 40-45 kg/m3 (Today is the best insulator existing on the market). The inner cladding is made of closed cell foam ISOPRO density 35 kg/m3 metallized faces 2 and the outer cladding is made of white cardboard EE 20kg (White external / internal Brown). The metallization of ISOPRO foam allows the optimal reflexion of the cold inside the case. Between these two elements, the high-density polyurethane foam 40/45 kg/m3 Closed cell effectively helps delay the entry of calories due to its low conductivity (Lambda = .021 W · m1 · K-1). The wall thicknesses range from 20 m / m to 100 m / m. Advantage: Instead of cardboard or plastic often used for interior and exterior insulated boxes skins, we use foam plates extruded metallic closed cell between which is injected high density closed cell polyurethane. With this substitution of materials, we could increase the duration of protection from 20% to 30%. Sarl au Capital de 199.520 Euros – Unité de production : 65, quai de Brazza 33100 BORDEAUX Centre de gestion : 22 bis, rue de la division Leclerc 78460 CHEVREUSE Tel : 33 (0)1.30.52.60.66 – Fax : 33 Fax : (0)1.30.52.66.24 SIRET : 497 662 502 00010 NAF :

medicgldCONSEIL Sizes Capacity (Liters) This insulated packaging, equipped with our packs liquid Eutectic "Positive cold" is suitable for the protection of sensitive products during shipment for a period of 48 to 144 hours, following the refrigeration load configurations. IMPORTANT; Configurations; > The configurations of the eutectic loads as well as the thicknesses of partitions are to be adapted according to: - The nature of the product (unit density, total mass product...) - Mode of transport - Type of room temperature - The duration of protection desired > Our cooling packs containing...