KM 2000 CnHm EM Accessories

Product catalog summary

Overview: This document provides detailed information on the accessories available for the ADOS KM 2000 CnHm EM hydrocarbon measurement system. It includes specifications for various components used in gas extraction and measurement processes.

Specifications:

Mounting Stubs: Available in V4A (1.4571) and St 37 materials, with options for insulation. They feature a single flange for mounting gas extraction pipes.
Heated Extraction Pipe: Length ranges from 1 m to 100 m, operational temperature between 65 °C and 120 °C, and nominal voltage of 230 V. It includes outer protection made of flame-retardant, halogen-free polyamide 6.
Test Gas Bottle: Contains synthetic air and N-Butane for calibration, with a filling pressure of at least 100 bar.
Pressure Reducer: Designed for test gas bottles, with an inlet pressure of up to 200 bar and output pressure ranging from 0.1 bar to 3 bar, made of brass.
Test Adapter: Compatible with ITR 498, GTR 210, GTR 196, and TOX 592 sensors.
Explosion Vent: BAM approved, suitable for gas measuring pipes.
Condensate Collector: Dimensions are 175 x 260 x 125 mm, includes a mounting sheet.

Procedures:

Sampled Gas Suction: Involves components such as sampled gas input, test gas input, and pre-filter or balance filter.
Gas Flow Schematic: Details the flow of gas through various components including the sampled gas pump, flow regulator, flow-through meter, and heating element.

Key Components:

Measurement System: Includes a catalyser chamber, comparison measurement, measurement point, and reaction chamber.
Monitoring and Control: Features a measurement amplifier, limit value monitor, measured value integrator, line plotter, and concentration indicator.
Temperature Control: Utilizes a heating element sleeve, temperature controller, and resistance thermometer.

Catalog excerpts

ACCESSORIES FOR HYDROCARBON MEASUREMENT ADOS GmbH Trierer Strasse 23 – 25 · 52078 Aachen · FRG

Open the catalog to page 1

HYDROCARBON MEASUREMENT Sampled gas extraction Carborundum filter with protective cap, gas sampling pipe with isolating valve and test gas valve Versions: - V 4 A material (1.4571) a) with insulation b) without insulation Mounting stubs Mounting stubs with single flange for mounting the gas extraction pipe. Versions: - material V4A (1.4571) - material St 37 - with single flange DN 50 / PN 6, 150 mm long Respirable dust filter with filter cartridge Double sided cutting ring screw connection for gas pipe breaker R 1/4" or 8 mm cutting ring connection Heated extraction pipe Technical Data: Length:...

Open the catalog to page 2

HYDROCARBON MEASUREMENT Pressure reducer Pressure reducer for connection to the test gas bottles. Technical Data: Inlet pressure: max. 200 bar Output pressure: 0,1 bar - 3 bar Material: Brass Test adapter - for ITR 498 sensor - for GTR 210 sensor - for GTR 196 sensor - for TOX 592 sensor Explosion vent Explosion vent for inserts in gas measuring pipes Type Wt, BAM approved ("BAM" = Federal Institute for Material Testing) Condensate collector Condensate collector with mounting sheet 175 x 260 x 125 mm (WxHxD) ADOS GmbH Instrumentation and Control

Open the catalog to page 3

HYDROCARBON MEASUREMENT A) Sampled gas suction B) Mounting stubs with single flange C) Heated gas suction pipe 1) Sampled gas input 2) Test gas input 3) Pre-filter or balance filter 4) Sampled gas pump 5) Flow regulator 6) Flow-through meter 7) Flow monitor 8) Heating element 9) Catalyser chamber 10) Comparison measurement 11) Measurement point 12) Reaction chamber 13) Measurement amplifier 14) Limit value monitor 1 – 4 15) Measured value integrator 16) Line plotter 17) Concentration indicator 18) Heating element sleeve 19) Temperature controller 20) Resistance thermometer 21) Gas output ADOS...

Open the catalog to page 4

All ADOS GmbH, Mess- und Regeltechnik catalogs and technical brochures

Archived catalogs

KM 2000 CnHm EM | Hydrocarbon Analyser
4 Pages