ZEBRA SHARK® ANCHORS 92.1 - 1 Pages

Add to MyDirectIndustry favorites
ZEBRA SHARK® ANCHORS 92.1

Catalog excerpts

ZEBRA SHARK ® ANCHORS without collar (mother-of-pearl red) with collar (mother-of-pearl white) 6, 8,10 mm dia. Installation Impact Tool Used for creation of the “drill hole” in aerated concrete (≤ PB4, pound in in stages: install, release etc.) Art. No. 0906 100 00 P. Qty. 1 Proof of performance Assortment case ZEBRAShark® Anchor Assortment Contents: 6 x 36 = 150 pcs., 6 x 37 = 150 pcs., 8 x 51 = 75 pcs., 8 x 52 = 75 pcs., 10 x 61 = 40 pcs., 10 x 62 = 40 pcs., = 530 pieces. Art. No. 0964 906 P. Qty. 1 1. Applications • Can be used with the largest possible screw diameter in solid and hollow-chamber stone, always enabling strong hold • Pre-formed thread in head • Three-part division for form-fitting or frictionally engaged anchoring • Wings as twist lock in solid or hollow-chamber stone 2. Advantages • Low screw-in torque of WÜPOFAST ® screw due to pre-formed thread • Twist lock due to locking edge running lengthwise • One screw diameter can be used – regardless of application • In hollow stones/walls, form-fitting results due to knotting together or bending out of spreading segments 3. Properties • The universal plug for subordinate securing in nearly all building materials • In solid and hollow-chamber stone of any kind • In gypsum plasterboard sheets, pressboard, wood panels etc. • For use with stud screws, hooks, ring screws, WÜPOFAST ®, ECOFAST ® screws and wood screws • Fully resistant to rotting, weather and aging • Temperature-neutral from – 40 °C to +100 °C Setting instructions Surface: Concrete and solid stone Drill hole Clean borehole Surface: Hollow-chamber stone Screw in screw until flush Surface: Gypsum plasterboard Drill hole Drill hole Screw in screw until flush

 Open the catalog to page 1

All Adolf Würth GmbH & Co. KG catalogs and technical brochures

  1. WALL HOOK

    1 Pages

  2. Edge Clamp

    1 Pages