LS-X
8Pages

Sturdy bench top shaker

2 LS-X with a universal tray The Kuhner LS-X is a sturdy bench top shaker designed for continuous and maintenance-free operation. The LS-X shaker has a load capacity up to 25kg. Performance characteristics + Sturdy bench top shaker + Accepts loads up to 25kg + Linear or orbital movement + Large display and touch pad controls + Ideal base for customised trays and holders Low energy requirements The in-house designed Kuhner magnetic drive system guarantees accurate control and low energy consumption even at high speeds. The LS-X is available with orbital or linear movement. User friendly...

Technical data Interface, standard CAN-Bus Interface, optional USB, Ethernet, digital, analogue Consumption, maximum 65W (130W with high torque drive SMX1031) • Shaking unit • Shaking motion Speed Loading, maximum 25kg * linear, 012.5mm 20...400rpm Setting, digital 1 rpm * linear, 0 25.0mm 20...300rpm Accuracy, absolute ±0.1 rpm * linear, 0 50.0mm 20...200rpm Acceleration controlled Active brake adjustable Stop on position adjustable • Mains connection

4 Universal tray fitted with clamps for Erlenmeyer flasks and test tube holders Options Tailored options for your shaker Dual table The dual table is an easy and economical way of doubling the shaking capacity. The dual shaking table consists of two levels. Each level will accept an E, EX or F size tray. However, with the dual table the shaking speed is limited to a maximum of 200 rpm. IQ-OQ Documentation IQ-OQ (Installation Qualification and Operation Qualification) is an equipment qualification required for GMP procedures. This service is available from Kuhner and can also be carried out...

LS-X (Lab-Shaker) | 5 ᕡ Tray F-250 with fixed clamps Tray E (420 x 420 mm) with fixed clamps Order number Description Tray EX (500 x 420 mm) with fixed clamps Order number Description Trays with fixed clamps The clamps are riveted onto these trays and cannot be removed. They offer maximum security and will often hold a larger number of flasks than universal trays. These trays (E, EX and F) are available in a variety of flask clamp sizes from 25 to 6000ml. Tray F (800 x 420 mm) with fixed clamps ᕡ Order number Description

Trays for microtiter plates Kuhner has designed trays specifically for microtiter plates. Handles at the front of the tray open and close the special clamping mechan- ism allowing plates to be loaded and unloaded. Trays of different heights (22, 47 and 77mm) allow the stacking of up to four micro- titer plates. The trays are suitable for all types of plates (deep well, Each mat is 20 x 20cm and can be cut to size.The E-size tray accepts 4 mats while the F-size tray reguires 7 mats. • Order number Description SM3702 E-tray with sticky mats (420 x 420 mm) SMX3702 I X ti.iy with stic ky m.its...

Trays with support bars Q These trays offer an alternative to both clamps and sticky mats and are ideal for tall containers.The tray is covered with a rubber mat and has an upright at each corner. E and EX size trays are fitted with four cross supports while the F tray is equipped with six.These support bars securely clamp containers. • Order number Description SM4120.4 EA-tray w'th rubber mat and 4 cross supports SMX4120.4 EXA-tray with rubber mat and 4 cross supports SM4130.6 FA-tray with rubber mat and 6 cross supports Trays for separating vessels Kuhner has also designed a special tray...

Shakers & Accessories www.kuhner.com Adolf Kühner AG • since 1949 Dinkelbergstrasse 1 CH – 4127 Birsfelden ( Basel ) Switzerland