ISF-1-X
8Pages

Kuhner shaker incubator shaker

+ Up to three machines can be stacked + Large shaking capacity with small footprint + Adjustable shaking diameters + Heating and cooling + CO and controlled humidity options 2 The ISF1-X incubator shaker is suitable for many applications in laboratories, research centres and production facilities. It offers a large shaking capacity with a small footprint, as well as many features allowing straightforward, safe handling of product. Reliability pays All ISF1-X components are designed for durability and reliability. A Kuhner shaker is a cost effective investment in quality backed with a five...

* optimised incubator shaker for cell culture + Improved temperature accuracy: Volume (empty) Weight (with cooling) 210 kg Interface, standard Interface, optional digital, analogue Ambient temperature • Shaking unit Tray, size Accuracy, absolute Active brake • Shaking motion Setting, digital Accuracy, absolute Principle of sensor capacitive Water refill automatic Principle of sensor Infrared, NDIR Mains connection

4 ᕢ Illumination unit for photosynthesis (LED) Options Multiple options for your shaker Cooling All Kuhner incubator shakers can be fitted with cooling. The refrigeration system is regulated by a fully digital PID control ensuring minimal energy consumption. The cooling is switched on only when required as determined by the chamber temperature and set point. Illumination unit for photosynthesis (LED) ᕢ The ceiling of any Kuhner incubator shaker can be fitted with LED modules for the cultivation of phototrophic organisms. The control module allows full programming of night/day cycles and...

ᕣ ISF1-X with a pull-out table Pull-out table ᕣ The pull-out table is designed for the ISF1-X and ISF4-X incubator shakers as well as the Rack System. This remarkable device makes loading and unloading trays much easier. Dual table The dual table is an easy and economical way of doubling the shaking capacity. The dual shaking table consists of two levels. Each level will accept an E, EX or F size tray. However, with the dual table the shaking speed is limited to a maximum of 200 rpm. Perspex cover To prevent accidental operation of the controllers, the panel can be protected by a perspex...

To suit your application The universal tray can be fitted with clamps for Erlenmeyer flasks, test tube holders, microtiter plates, sticky mats, or custom made holders to suit your requirements. Rearranging these clamps and holders is quick and simple._ F-tray (800 x 420 mm) for microtiter plates 0 Kuhner has designed trays specifically for microtiter plates. Handles at the front of the tray open and close the special clamping mechan- ism allowing plates to be loaded and unloaded. Trays of different heights (22, 47 and 77mm) allow the stacking of up to four micro- titer plates. The tray is...

ᕧ F-tray for centrifuge tubes F-tray (800x420 mm) with sticky mats Order number: SM3703 A tray fitted with sticky mats is especially useful for flasks shaken at low speeds (up to 200 rpm). The flask is placed directly on the sticky mat without the need for any other support. Flasks of all sizes can be used. Sticky mats are available individually or in sets and can also be supplied already fitted to a tray. Each mat is 20 x 20cm and can be cut to size. The F-size tray accepts 7 mats. F-tray with support bars Order number: SM4130.6 This tray offers an alternative to both clamps and sticky...

Shakers & Accessories www.kuhner.com Adolf Kühner AG • since 1949 Dinkelbergstrasse 1 CH – 4127 Birsfelden ( Basel ) Switzerland