ES-X
8Pages

nuhner shaker Shaker with separate control unit suitable for use in incubators with humidity

2 ES-X with separate controller The ES-X is a specially designed shaker with a separate controller. It is ideal for use in existing incubators or temperature controlled rooms as the shaking unit with its stainless steel casing can be placed in areas of high temperature (up to 80°C) and humidity (up to 95% rH). Performance characteristics + For use in incubators or temperature controlled rooms + Ideal for cell culture applications + Special version available for robotic systems + Minimal heat transfer and low energy consumption + Stainless steel motor casing Installation in existing...

Interface, standard CAN-Bus Interface, optional USB, Ethernet, digital, analogue Consumption, maximum 65W (130W with high torque drive SMX1031) • Shaking unit Loading, maximum Acceleration controlled Active brake adjustable Stop on position adjustable • Shaking motion Speed • Mains connection

4 Clamps of different sizes Options Tailored options for your shaker Dual table The dual table is an easy and economical way of doubling the shaking capacity. The dual shaking table consists of two levels and each level will accept an E, EX or F size tray. However, with the dual table the shaking speed is limited to a maximum of 200 rpm. IQ-OQ Documentation IQ-OQ (Installation Qualification and Operation Qualification) is an equipment qualification required for GMP procedures. This service is available from Kuhner and can also be carried out at the customer`s premises. Accessories To suit...

ES-X (Lab-Shaker) | 5 ᕡ Tray F-250 with fixed clamps Tray E (420 x 420 mm) with fixed clamps Order number Description Tray EX (500 x 420 mm) with fixed clamps Order number Description Trays with fixed clamps The clamps are riveted onto these trays and cannot be removed. They offer maximum security and will often hold a larger number of flasks than universal trays. These trays (E, EX and F) are available in a variety of flask clamp sizes from 25 to 6000ml. Tray F (800 x 420 mm) with fixed clamps ᕡ Order number Description

Trays for microtiter plates Kuhner has designed trays specifically for microtiter plates. Handles at the front of the tray open and close the special clamping mechan- ism allowing plates to be loaded and unloaded. Trays of different heights (22, 47 and 77mm) allow the stacking of up to four micro- titer plates. The trays are suitable for all types of plates (deep well, Each mat is 20 x 20cm and can be cut to size.The E-size tray accepts 4 mats while the F-size tray reguires 7 mats. • Order number Description SM3702 E-tray with sticky mats (420 x 420 mm) SMX3702 I X ti.iy with stic ky m.its...

Tray with support bars Trays with support bars Q These trays offer an alternative to both clamps and sticky mats and are ideal for tall containers.The tray is covered with a rubber mat and has an upright at each corner. E and EX size trays are fitted with four cross supports while the F tray is equipped with six.These support bars securely clamp containers. • Order number Description SM4120.4 EA-tray w'th rubber mat and 4 cross supports SMX4120.4 EXA-tray with rubber mat and 4 cross supports SM4130.6 FA-tray with rubber mat and 6 cross supports Trays for separating vessels Kuhner has also...

Shakers & Accessories www.kuhner.com Adolf Kühner AG • since 1949 Dinkelbergstrasse 1 CH – 4127 Birsfelden ( Basel ) Switzerland