Circular Magnet Type ADR
1Pages

Circular Magnet Type ADR for handling of scrap current (Amps cold) * mentioned slab lifting capacity and pull-off strength is referring to optimum conditions in accordance to German standard DIN-VDE 0580 (diameter / 300); please consider max. lifting capacity of magnet suspension ** mentioned scrap lifting capacity is based on tests under optimum conditions in accordance to German standard DIN-VDE 0580; effective performance will vary with specific operating conditions - nominal voltage of all magnets 220 VDC (300 VDC for ADR 22), customized voltage and/or customized power upon request AdobA GmbH – Lifting Magnets ● Oderstr. 11b ● D-47506 Neukirchen-Vluyn ● Germany ● Phone: +49 2845 9842320 ● Fax: +49 2845 9842324 ● www.adoba.de ● info@adoba.de ADR vers. 2020.09 • subject to change The circular scrap lifting magnet series ADR has been designed for high-demanding lifting application, such as handling of scrap onto excavators or overhead-/ and gantry cranes, charging of scrap buckets in steel mills or foundries but as well for (un)loading of trucks, railcars or vessels. Rugged design with ribbed single-piece casted housing of high permeability steel provides best stability and make this type of magnet ideally suited for rough application. Oversized outer poles are reducing wear of magnet pole surface, for that reason you will find diameter of magnets being bigger than standard. The ribs of housing are increasing surface of the magnet by about one third, therefore heat can be dissipated easily, resulting in lower operating temperature of magnets and thus minimum reduction in lifting capacity, to provide maximum performance even under 3-shift operation. By standard magnets will be equipped with 3-leg alloy chain, attached onto massive double straps of magnet body, resulting in low wear and long-time average life expectancy. Electrical connection via fix terminal box by standard, installed behind massive ØA protective plate, heavy plug & socket connection upon request. Please select suitable type of magnet from this list or send inquiry with description of your application, we will offer most suitable type of magnet from technical and economical point of view. AdobA quality design with 75 % D.C., class “C” insulation, anodized aluminum strip coil and flexible silicone casting co