Rotosolver® CX The Ultimate Design in High Shear Dispersion Performance and Efficiency The Admix Rotosolver® CX is an in-tank disperser designed for fast incorporation of powders into liquids. The patented design of its shear head is the key to achieving homogenous dispersions in less time than traditional dispersion blades. Shorter batch times, higher quality dispersions, and lower energy consumption are some of the key performance advantages that the Rotosolver delivers. Less Energy Consumption: The slotted shear head of the Rotosolver CX generates high pumping action within the mixing vessel, thus consuming less energy and requiring lower horsepower motors than competitive models. Time Saving Dispersion: With the Rotosolver CX, batches can be completed in less time compared to mixing with conventional dispersion discs. Powders are 100% hydrated and dispersed, and agglomerate-free in as little as 10 minutes in many cases. This is due to multiple shear zones in the Rotosolver shear head, combined with high product flow which results in superior dispersion performance. Additionally, many products that typically require a two-stage process can now be completed in the same tank with the Rotosolver technology. Easy-to-Clean Design: The open design of the mixing chamber ensures that cleaning for formula changeovers requires minimal time and effort. Flow pattern: Blue arrows = flow into the mixing head Green arrows = expulsion from the mixing head Your Mixing Technology Partner Reduce energy consumption up to 30% Increase overall shear rates Reduce batch times for increased capacity Improved cleanability Retrofit available for existing installations Wet out and disperse powders, fillers, rheology modifiers, resin, and let down liquids in one convenient process Admix Chem

Typical Selection of a Rotosolver The following table lists many of our standard Rotosolver CX models, along with typical working volumes based on the specific design criteria listed below. All selections are based on a moderate level of mixing (mixing intensity of 7.0) and a specific gravity of 1.0. However, we customize our mixers for specific applications. Higher viscosities, greater mixing intensities, non-standard tank geometries or a specific gravity greater than 1.0 may require a different selection than shown. Different ingredients may require higher tip speeds for best performance and...