Catalogs >
Admix >
Rotomaxx™

Rotomaxx™
1 / 2Pages

Catalog excerpts

Rotomaxx High Torque, High Flow, Right Angle Mixers Built to sanitary standards at a competitive price For larger tank volumes requiring rapid turnover & high eﬃciency agitation, but also designed to meet stringent CIP washdown, pressure washing and steam cleaning conditions. The Rotomaxx is available in both a Pharmaceutical or a Food grade, all stainless conﬁguration, with multiple output speeds and seal combinations. Our Jetfoil™ impeller technology provides 200% of the pumping rate found on conventional axial blade impellers. Big performance in a compact package • Total washdown capability with (#73-01) compliance • Tank Volumes to 10,000 gallons • Pumping Rates to 20,000 GPM • 1/2 to 3 HP, 30-235 RPM output speeds • Right angle design for low headroom space • Validation documentation & factory acceptance testing (FAT) for GMP and FDA requirements With a small footprint and low headroom design, the Rotomaxx is ideal where space is critical on large tanks Your Mixing Technology Partner

Open the catalog to page 1

Rotomaxx Speciﬁcations Selection & Performance The Rotomaxx series of stainless steel mixers are available in three (3) basic conﬁgurations as shown below: Mixer Model Shaft Diameter Maximum Shaft Length Foil Diameter Ease of Installation & Service The modular design of the Rotomaxx components, along with the hollow quill bore of the reducer, allows for easy mounting and servicing. Our MixxScale (MS) selections range from 1 through 4 with MS = 1 providing a lower level of agitation with little vortex and longer blend times (10-30 minutes), while MS = 4 is characterized by very vigorous...

Open the catalog to page 2

Rotomaxx™ 1 / 2Pages

Catalog excerpts

All Admix catalogs and technical brochures

Rotomaxx™
1 / 2Pages