High Torque, Right Angle Slow Speed Agitator Premium 316SS machined for greater corrosion resistance Motors are 300 Series Stainless Steel The only all stainless steel, low speed, large capacity agitator The robust Rotomaxx II, with right angle helical bevel gearbox, is designed for the most demanding operating environments and stringent CIP, washdown, pressure washing, and steam cleaning conditions. Dual, single-lip seals provide ultimate cleanability Impeller shaft length available up to 144” The modular design allows for multiple shaft diameter, gear ratio, and motor horse power combinations with flex couplings between the motor/gearbox and gearbox/drive shaft to protect the gear drive from shock loads and dampen vibrations while isolating shaft bending moment and deflection loads from the torque loads on the gearbox. The Admix Advantage Tank volumes to 60,000+ gallons Entire unit is designed for total wash-down duty for food, pharmaceutical and cosmetic industries Jetfoil™ impeller technology provides 200% greater pumping rate over conventional axial blade impellers Maintenance-free, greased-for-life, sealed bearings in bearing frame Premium high efficiency, ground helical bevel gearing provides 20-30% more efficient gearing than conventional worm gearing Synthetic food grade lubrication in gear drives Up to 15 HP Input Output torque up to 6100 in-lb with 1.25 service factor Your Mixing Technology Partner

Features & Benefits Mounting for NEMA or IEC C-face/B5 Motors The Rotomaxx II series of stainless steel mixers are available in three (3) basic configurations as shown below: Mixer Model Maximum Shaft Length Impeller Diameter HP Range Shaft Diameter Flex couplings between the motor/gearbox and gearbox/drive shaft provide vibration damping and shock load protection to drive components. Three (3) waterproof pressure compensation vents allow air inside the gearbox and driveshaft bearing frame to expand and contract as temperatures inside and outside the agitator change and prevent moisture and contaminants...