PIC™

PIC™

PIC™

Product catalog summary
Overview
The document outlines the benefits and features of Admix's Powder Induction Systems, specifically the Optifeed OES and PIC Systems. These systems are designed to improve efficiency and safety in mixing processes by reducing operator injury, improving product quality, and enhancing ingredient functionality.

Key Benefits
  • Reduction in operator injury and risk of accidents.
  • Improvement in product quality and yields.
  • Reduction in mix times and prevention of wasted ingredients.
  • Capability to handle powder induction up to 200 lbs/minute and viscosity up to 2,500 cps.
  • Construction with 304/316 stainless steel and CIP capability.
  • Optional features such as wand attachment and NEMA 4X controls.

System Specifications
  • The systems can process 50 to 200 pounds/minute of dry or liquid materials.
  • Includes a 3.5 cubic foot powder hopper and modular frame for easy ingredient loading.
  • Ergonomic design with waist-high hopper and work table to prevent operator injury.
  • Standard Tri-Clamp® fittings and 100% made in the USA.

Options and Customization
  • Electropolished hopper and wetted parts for specific needs.
  • Special designs for difficult powders, including air sparge and vibration systems.
  • Various motor types and actuated valves available.
  • Double seal for high solids processing and protection against dry running.

Operational Guidelines
  • Materials that dissolve easily can be sent directly to the next process step.
  • Materials requiring shear can be recirculated through a batch tank or processed in-line with high shear mixers.
  • Maximum viscosity before or after ingredient introduction is 2500 cps, with a maximum allowable head on discharge of 10 psi.
  • Minimum incoming flow rate for the system is 35 GPM.

Contact Information
Admix, Inc. is based in Londonderry, NH, with contact details provided for further inquiries.
See more

Catalog excerpts

PIC™-1

Ergonomic Atmospheric Powder Induction Technology Designed to handle higher viscosities and higher powder feed rates The Admix Powder Induction Systems provide rapid introduction and wetting out of dry solids and/or liquid ingredients. The Optifeed OES and PIC Systems can process from 50 to 200 pounds/minute of dry or liquid materials depending upon system settings and process conditions. An integrated control valve enables system setting adjustments, without the need for a trained mechanic, allowing processors to take full advantage of the superior suction capabilities of this powder induction technology. Benefits to your Process • Reduce operator injury • Improve product quality • Reduce the risk of accidents • Increase ingredient functionality • Reduce mix times • Fast ingredient addition • No more wasted ingredients • Improve yields Standard OES system includes a 3.5 cubic foot powder hopper and modular frame at floor level for easy access to load ingredients Standard PIC system includes a 3.5 cubic foot powder hopper, ergonomic waist-high work table, sanitary powder suction pump, powder valve, vacuum gauge, vacuum regulator valve, control box for pump and interconnecting piping • Powder induction capacities up to 200 lbs/minute • Viscosity capability of 2,500 cps and 78% maximum solids • All 304/316SS construction with CIP capability • Optional wand attachment available • Integrated sanitary clamps, valves and piping • Optional NEMA 4X controls for pump • Pre-engineered models for quick shipment

 Open the catalog to page 1
PIC™-2

Ergonomic Design Prevents Operator Injury The OES and PIC Systems feature an ergonomic waist-high hopper for the addition of all ingredients required in the mix and utilize a high performance powder suction pump to convey from 3 to over 200 pounds per minute of any powder or solid. The PIC System also includes an ergonomic work table and washdown integral control panel. Standard Features • 100% made in the USA, all fittings are standard Tri-Clamp® type • 304/316 stainless steel construction • Easily and cost effectively adapted to your specific space requirements and restrictions Options • Electropolished...

 Open the catalog to page 2

All Admix catalogs and technical brochures

  1. Diatint CX

    2  Pages

  2. Diamix CX

    2  Pages

  3. Rotosolver CX

    2  Pages

  4. Rotomaxx™

    2  Pages

  5. Rotostat™

    2  Pages

  6. Rotomixx®

    2  Pages

  7. Rotosolver®

    2  Pages

  8. Mayomill®

    2  Pages

  9. Rotofoil®

    2  Pages

  10. Rapidex™

    2  Pages

  11. Optifeed™

    2  Pages

  12. Fastfeed®

    2  Pages

  13. Admixer™

    2  Pages

  14. Benchmix®

    2  Pages

  15. Dynashear®

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.