ADLQM87HD 3.5-Inch SBC
2Pages

Embedded Solutions ADLQM87HD - 4th Generation Intel® Core™ Quad/DC i3/i5/i7 Features 4th Generation Intel® Core™ i3 / i5 / i7 PCH Lynx Point QM87 Chipset Dual and Quad Core; 37W to 47W Up to 16GB DDR3L-1600; 2x SO-DIMM 204, 1.35V PCIe 2.0 2x40 pin Bus Connector (1x PCIe x4 or 4x PCIe x1) 4x SATA, RAID 0/1/5/10 (2x SATA 6Gb/s, 2x SATA 3Gb/s) 2x 10/100/1000Mbit Ethernet LAN Port 8x USB 2.0; 3x USB 3.0 Separate Onboard DVI / VGA, HDMI / DP Mini PCI Type III Expansion Socket 3x COM; RS232 Only TPM (Trusted Platform Module) V1.2 (ATMEL AT97SC3205) Windows 7, Windows 7 Embedded Standard, Windows 7 Embedded Compact, XP Embedded Linux Compatible Discrete 8-bit GPIO Port 7.1 HD Audio with SPDIF In/Out 4” x 5.8” (102mm x 147mm) 3.5-inch Form Factor Ordering Information Item Code DDR3L-1600MHz 8GB Standard Temperature Other memory options available Options and Accessories ADL-ET Extended Temp Screen (-40º to +85º C) Standard Cable kit for ADLQM87HD Chassis / Bulkhead mount heat spreader for ADLQM87HD For Quad and Dual Core Variants. Large Heatsink for bench testing; requires ADL35-LFAN The ADLQM87HD features Intel's 4th generation Intel Core™ processors with Intel’s latest HD Graphics 4600 engine with support for DirectX11.1, OpenGL 4.0, and OpenCL 1.2. The new Haswell Architecture built on Intel’s low-power 22nm tri-gate process incorporates a new AVX2 instruction set, more instructions per cycle, deeper idle states, more execution units, higher cache bandwidth, and smarter power management with the end result being a significant performance increase with much lower power than the previous Sandy Bridge architecture. The ADLQM87HD is ideal for mobile and embedded applications where high processor performance with low battery or power usage is critical. It brings unparalleled performance to applications such as radar and sonar processing, image signal processing, tactical command and control, surveillance and reconnaissance, medical imaging and lab analysis, and industrial automation. In addition to the wide range of applications in which the ADLQM87HD can excel, it also supports a broad set of features. The ADLQM87HD introduces TPM 1.2 and USB 3.0 functionality into ADLES’ 3.5” SBC product line for the first time . Onboard connectors support both DVI/VGA as well as HDMI/DP. The ADLQM87HD also has 3x RS232 COM ports, 4x SATA 6Gb/s with RAID 0, 1, 5 and 10 support. It also includes 8x USB2.0, 3x USB 3.0, two bootable Gigabit Ethernet LAN ports, HDA 7.1, and a 2x40-pin PCIE expansion connector with four PCIe x1 lanes or one PCIe x4 lane for additional breakout or mezzanine board functionality.. ADL Embedded Solutions offers highly effective active and passive thermal solutions designed for this product. Contact your sales representative for more information. ADL Embedded Solutions GmbH, Eiserfelder Straße 316 D-57080 Siegen, Germany P. +49 (0) 271 250 810 0 F. +49 (0) 271 250 810 20 e-mail: sales@adl-europe.com; web: www.adl-europe.com Data subject to change without notice. ADL Embedded Solutions Inc., 4411 Morena Blvd., Suite 101 San Diego, CA 92117-4345 P. +1 858 490-0597 F. +1 858 490-0599 e-mail: sales@adl-usa.com; web: www.adl-usa.com

Embedded Solutions Technical Specifications - ADLQM87HD FEATURE 4th Generation Intel Core i3/i5/i7 See ordering guide on page 1 See ordering guide on page 1 CPU Option / Performance (GHz) / L3 Cache Max. No. of Cores Soldered (or Socket Name) See ordering guide on page 1 Chipset North Bridge (GMCH) Hardware monitoring Memory Type Size max (MB) Graphic Controller CRT or DVI-I is cabling option HDMI or DVI-D is cabling option BIOS APM/ACPI BIOS Setup 10/100/1000 Mbit, RPL/PXE/WOL support Jumbo Framing supported 10/100/1000 Mbit, RPL/PXE/WOL support Jumbo Framing supported Power Management...