Embedded Solutions ADLPCIe-PCI: PCIe Bus to PCI Bus Bridge Adapter Features • • • • • • • Pericom PCIe to PCI Bridge Chip 2 Additional USB 2.0 from Host SBC via PCIe Bus Single PCIe x1 Lane Converted to 4 PCI Loads Provides Legacy PCI-104 Support in PCIe/104 System Standard PCIe/104 Form Factor Compatible with third-party PCIe/ 104 Boards Temperature range -40C - +85C Ordering Information Item Code Technical Specifications Board Feature Bridge Controller The ADLPCIe-PCI bridge card enables the upgrade of existing PCI platforms to PCIe/104-based SBCs while maintaining legacy support for PCI peripherals. For example, current systems utilizing our PCI/104 ADL945PC or PC/104+ ADL855PC can incorporate our latest second and third generation Intel® Core™ SBCs while maintaining legacy PCI support. The ADLPCIe-PCI PCIe/104 bus adapter converts a single PCIe link lane (x1) into up to four 32-bit PCI loads operating at 33/66 MHz; allowing legacy PCI-104 and PC/104-Plus cards to be connected in a PCIe/104 system stack. The ADLPCIe-PCI also provides connection of an additional 2 USB ports routed from the host SBC over the PCI Express bus. 2x ports from host via PCIe bus PCI Express Feature Physical Layer Interface PCIe/104 Type 1 x1 link at 2.5GT/s data rate PCI Express to PCI/PCI-X Bridge Specification Revision 1.0 compliant PCI Feature Physical Layer Interface Up to four PCI loads (Masters) Data subject to change without notice ADL Embedded Solutions GmbH, Eiserfelder Straße 316 D-57080 Siegen, Germany P. +49 (0) 271 250 810 0 F. +49 (0) 271 250 810 20 e-mail: [email protected]; web: www.adl-europe.com ADL Embedded Solutions, Inc. 4411 Morena Blvd., Suite 101 San Diego, CA 92117-4345 P. +1 858 490-0597 F. +1 858 490-0599 e-mail: [email protected]; web: www.adl-usa.com