ADLLAN
6Pages

Embedded Solutions ADLLAN - PC/104-Plus Ethernet LAN Features • PCI based Ethernet LAN card for PC/104-Plus • Dual Intel 82541ER Gigabit Ethernet LAN controllers support connection speeds of 10/100/1000 Mbps • Enhanced Power Management for Reduced Power applications • Single and dual port configurations available - Dual port model uses two PCI loads (slots) • High-Performance PHY Technology meets IEEE 802.3ab Specifications • Footprint Compatibility with other Intel PRO Connections for Flexible Designs • Top and bottom stacking PC/104-Plus pass-through connectors for ease of stack configuration • Optional connection headers for cabling embedded applications • Jumper configurable PCI load selection for flexible integration with other peripherals This PC/104-Plus expansion board is available with either a single 1Gbit LAN Port or dual 1Gbit LAN Port. Ordering Information The Intel 82541ER Gigabit Ethernet Controller provides optimized Gigabit networking for PCI designs. This highly efficient controller, with enhanced power management, consumes less than 1.0W of power at Gigabit speeds. When no signal is detected on the wire, the controller reduces power consumption by “downshifting” to 100Mbps to 10Mbps and then powering down the physical-layer circuitry (PHY). When a signal is detected, the controller automatically negotiates the connection to Gigabit, if available. Item Code 1Gbit single port LAN board 1Gbit dual port LAN board The Intel 82541ER combines Intel’s fifth-generation Gigabit MAC design with fully integrated state-of-the-art PHY technology, which meets or exceeds IEEE 802.3ab specifications for Bit Error Rate performance. Data subject to change without notice ADL Embedded Solutions GmbH, Eiserfelder Straße 316 D-57080 Siegen, Germany P. +49 (0) 271 250 810 0 F. +49 (0) 271 250 810 20 e-mail: sales@adl-europe.com; web: www.adl-europe.com ADL Embedded Solutions Inc., 4411 Morena Blvd., Suite 101 San Diego, CA 92117-4345 P. +1 858 490-0597 F. +1 858 490-0599 e-mail: sales@adl-usa.com; web: www.adl-usa.com

Embedded Solutions Block Diagram The ADLLAN is a PCI - based dual port Gigabit Ethernet LAN card that utilizes the Intel 82541ER Ethernet LAN controller. It is built in accordance with the PC/104-Plus specificationas and includes top and bottom PC/104 and PC/104-Plus connectors. The board is also equipped with PCI slot selection jumpers that allow for easy integration with other PC/104-Plus stackable peripherals. The ISA bus connector is included to pass the ISA bus through the board to ISA peripherals that may be included in the stack. The board comes equipped with onboard low profile RJ45...

Embedded Solutions ADL Embedded Solutions GmbH, Eiserfelder Strafce 316 D-57080 Siegen, e-mail: sales@adl-europe.com; web: www.adl-europe.com Data subject to change without notice ADL Embedded Solutions Inc., 4411 Morena Blvd., Suite 101 e-mail: sales@adl-usa.com: web: www.adl-usa.com

Embedded Solutions Both LAN interfaces are provided via optional 2x6pin connector (FCI 98424-G52-12LF, mating connector e.g. FCI 90311- 012LF). The interfaces support 10BaseT, 100BaseT, and 1000BaseT compatible network components with automatic bandwidth selection. Additional outputs are provided for status LEDs. Auto-negotiate and auto-cross functionality is present. Development cables are available. Data subject to change without notice ADL Embedded Solutions GmbH, Eiserfelder Strafce 316 D-57080 Siegen, ADL Embedded Solutions Inc., 4411 Morena Blvd., Suite 101 e-mail:...

Embedded Solutions ADLLAN - PC/104-Plus Ethernet LAN LAN RJ45 Both LAN interfaces are standard populated with low profile RJ45 connectors onboard. The interfaces support 10BaseT, 100BaseT, and 1000BaseT compatible network components with automatic bandwidth selection. Description LAN channel 0 plus LAN channel 0 minus LAN channel 1 plus LAN channel 2 plus LAN channel 2 minus LAN channel 1 minus LAN channel 3 plus LAN channel 3 minus Data subject to change without notice ADL Embedded Solutions GmbH, Eiserfelder Straße 316 D-57080 Siegen, Germany P. +49 (0) 271 250 810 0 F. +49 (0) 271 250...

Embedded Solutions ADLLAN - PC/104-Plus Ethernet LAN Board Configuration Before the ADLLAN board can be installed onto a stack, the PCI slot Setting Jumpers (P303) must be installed to properly set the PCI loads to match the physical stack location on the PCI bus. For example, if the single port ADLLAN is to be the first PCI board closest to the CPU, then a jumper shunt should be installed on 1-2 and 3-4, or all jumpers can remain open. Reference the table below or on the ADLLAN card to properly configure the ADLLAN PCI bus. NOTE The ADLLAN requires two PCI slots (masters) when the dual...