Embedded Solutions ADLCOM-ISOL - Isolated RS232 to RS232 / RS485 Transceiver In-line RS232 to Isolated RS232 or RS232 to Isolated RS485 Transceiver 1kV DC Isolation for 1 second; 500V AC/ 60Hz Isolation for 1 minute Supports Data Rates up to 250Kbps in Isolated RS232 and Isolated RS485 Can be Ruggedized for Harsh Environments Ordering Information Item Code Unshielded Cable, 9-Pin D-Sub to 2MM Latching Shielded Cable ADLCOM 9-Pin D-Sub to 2MM Latching Shielded Cable ADLCOM pass-thru 2mm - 2mm Latch Shielded Cable ADLCOM pass-thru 2.54mm - 2mm Latch The ADLCOM-ISOL in-line isolated transceiver, available in two models, for RS232 and RS485 provides peace of mind when faced with using a computer system in electrically noisy or unstable environments. With isolation of 500V AC / 60Hz for 1 minute and 1kV DC isolation for 1 second, you can rest assured that the ADLCOM-ISOL has the ability to catch many transients from the outside world that could do catastrophic damage to an embedded computer investment. The ADLCOM-ISOL also provides a means of simple and effective isolation of standard serial ports without the need to add another board to your embedded system. The ADLCOM-ISOL is ideal for use in Automotive, Railway, Automation, and many other applications where protection from transient voltages is a must when connecting to the outside world. The ADLCOM-ISOL can also be ruggedized for harsh environments. Two convenient mounting holes are provided for ease of installation. At just 40mm x 26mm (1.6” x 1.0”), the ADLCOMISOL will mount in tight spaces in most enclosures or environments. Data subject to change without notice. ADL Embedded Solutions GmbH, Eiserfelder Straße 316 D-57080 Siegen, Germany P. +49 (0) 271 250 810 0 F. +49 (0) 271 250 810 20 e-mail: [email protected]; web: www.adl-europe.com ADL Embedded Solutions Inc., 4411 Morena Blvd., Suite 101 San Diego, CA 92117-4345 P. +1 858 490-0597 F. +1 858 490-0599 e-mail: [email protected]; web: www.adl-usa.com

Embedded Solutions Technical Specifications Block Diagram Note: Imax limit of 100mA on ISO_VCC Note: Supplied VCC must be +5VDC +/- 10% Data subject to change without notice. ADL Embedded Solutions GmbH, Eiserfelder Straße 316 D-57080 Siegen, Germany P. +49 (0) 271 250 810 0 F. +49 (0) 271 250 810 20 e-mail: [email protected]; web: www.adl-europe.com ADL Embedded Solutions Inc., 4411 Morena Blvd., Suite 101 San Diego, CA 92117-4345 P. +1 858 490-0597 F. +1 858 490-0599 e-mail: [email protected]; web: www.adl-usa.com