GV Series
6Pages

METAL FORMING SOLUTIONS SHEARS GV TECHNICAL DATA SHEETS

ADIRA METAL FORMING SOLUTIONS GV The ADIRA GV range of hydraulic shears are robust and reliable, characterised by their vertical cutting blade and variable angle. Strips are less twisted when cutting thicknesses less than the nominal thickness, by using a smaller cutting angle.

Main Features Robust back gauge with movable positioning, allows rotation for retraction of the guide Adapts to cutting sheets of any thickness up to maximum capacity Strips are less twisted when cutting thicknesses less than nominal thickness, by using a smaller cutting angle and integrating the optional anti-torsion system 4-edged upper and lower blade; Little or no torsion demand on the frame and blade holder; Standard 410 mm arch and possibility of special arches; Cuts greater thicknesses (between 16 and 25 mm). Solution for customers that need a high-yield, high-performance machine....

Back gauges Auxiliary ramp for repeat cuts ■ Support table for thin sheets - heavy-duty series ■ Unloading ramp standard Simple front support arm, L=1600 mm standard 2 Front support arms with scale, L=1600 mm standard Additional front support arm with scale, L=1600 mm ■ 2 long squaring guides, L=1600 mm standard Additional long squaring guide, L=1600 mm ■ - every additional 500 linear mm ■ Squaring arm with scale and pedestal, L=2050 mm ■ Squaring arm with scale and pedestal, L=3050 mm ■ Squaring arm with two scales and pedestal, L=2050 mm ■ Squaring arm with two scales and pedestal, L=3050...

Rua das Lages 67 . 4410-272 Vila Nova de Gaia T.: +351 226 192 700 . adira@adira.pt