BBATC
12Pages

METAL FORMING SOLUTIONS AUTOMATIC TOOL CHANGER

03 AUTOMATIC TOOL CHANGER DESCRIPTION AND FUNCTION 05 AUTOMATIC TOOL CHANGER - SINGLE 05 AUTOMATIC TOOL CHANGER - TWIN 06 TECHNICAL FEATURES 08 STANDARD EQUIPMENT 09 APPLICABILITY REQUIREMENTS FOR THE BENDING MACHINE 09 PRESS BRAKE FEATURES 09 INSTALLABLE OPTIONS 10 SOFTWARE REQUIREMENTS 11 AVAILABLE OPTIONS

AUTOMATIC TOOL-CHANGER Automatic tool changer is an innovative device designed to achieve automatic changeover of upper and lower tools, saving set-up time and offering greater production efficiency. 3

ADIRA METAL FORMING SOLUTIONS The system is able to perform General Function Bending stations and tool management - The system’s manipulator selects and places punches and dies from the tool library — avoiding costly delays typically associated with conventional tool changes. The machine’s general function is to move or replace the punches and dies of a bending press brake. The tool changer is equipped with a mobile rack storage. The tool change moves by electric motors the racks inside its storage positioning them near the shuttle that picks up the tool and drags it inside the press....

AUTOMATIC TOOL CHANGER TECHNICAL FEATURES The tool changer system consists of mobile units with corresponding axes (6) XC RC ZC VC X2C AC. AUTOMATIC TOOL CHANGER TECHNICAL FEATURES The tool changer system consists of mobile units with corresponding axes (7) Correspondent XC RC ZC VC X2C AC V2C. The system can equip two machines by removing the tools from a single storage. The system has been designed to allow the same functions as a single machine system. The safety system allows you to equip the machine on the right or left and simultaneously work on the machine already equipped. The...

ADIRA METAL FORMING SOLUTIONS AXES AND DIRECTIONS The tool changer has 6 (7 for TWIN versions) motorized axes, with a maximum of 4 axes working simultaneously. STORAGE POSITION AUTOMATIC TOOL CHANGER MODEL ATC S32 Height:

TOOLS FEATURES TOOLS WILA STYLE Maximum tool Length

ADIRA METAL FORMING SOLUTIONS STANDARD EQUIPMENT SAFETY SYSTEM During tool change activation, a couple of light curtains located in front of the machine protects front access to the press brake. The motorized light curtains optional designed for automatic tool changing reduce setup times, as there is no need for manual adjustment. They are also equipped with an anti-crushing system. The applicability of the tool change to the pressbending machine is subordinate to the light curtains stroke, as they need to be out of the way when the tool change works, to avoid collisions with the rotation...

INSTALLABLE OPTIONS

SOFTWARE REQUIREMENTS Communication PLC Menu: it is possible to load the PLC or display some errors Channel Monitor: it is possible to display the positions of the axes, speed, voltages Archives Management: allows files to be copied between different units application, it is possible to access the drop-down menu containing the following functions: Alarm History: access to the alarm history Shared Editor: access to all the NC parameters, usually used to change axis parameters Password: entering the password is accessed with a user with higher privileges Language: it is possible to select the...

AVALIABLE OPTIONS TOOL LENGHT SAFETY 32 meters 52 meters CE

Rua das Lages 67 . 4410-272 Vila Nova de Gaia T.: +351 226 192 700 . adira@adira.pt