BB Series

Product catalog summary

Overview
The document provides technical specifications and features of the ADIRA Metal Forming Solutions Press Brakes BB, a fully electric machine designed for precision and energy efficiency. It is equipped with a Hexa-C frame and powered by the Bluedrive system.

Main Features

Hexa-C frame ensures precision in guiding the movable ram.
No stoppages required when changing bending speed, reducing cycle time.
High acceleration and deceleration ramps.
Off-centre bending capability with pre-loaded guidance system.
Bluedrive system offers fast, precise, and clean operation with heavy-duty servomotors.

Benefits

High precision in stopping the movable ram (+/- 0.002 mm).
Energy consumption is 40-60% lower compared to hydraulic press brakes.
Low mechanical complexity simplifies maintenance.

Technical Specifications

Models: BB 3515 and BB 5020.
Bending strength: 350 kN and 500 kN respectively.
Max bending length: 1500 mm and 2000 mm respectively.
Power: 2x5.5 kW and 2x7.5 kW respectively.
Approach speed: 140 mm/s and 130 mm/s respectively.

Equipment and Accessories

Various punch holders and clamping options available.
Support arms and bending followers available on request.
Multiple back gauge configurations for different models.
Laser safety systems and angle measurement options.
Control systems include ESA and DELEM options.

Additional Options

Air conditioning for the electrical cabinet.
Standard and special tool kits available.
Digital goniometer and ergonomic kits on request.
Capability for tandem machine operation.

Contact Information
ADIRA Metal Forming Solutions, Rua das Lages 67, 4410-272 Vila Nova de Gaia, Portugal. Phone: +351 226 192 700, Email: [email protected]

Catalog excerpts

METAL FORMING SOLUTIONS PRESS BRAKES BB TECHNICAL DATA SHEETS

Open the catalog to page 1

ADIRA METAL FORMING SOLUTIONS Press Brakes BB Equipped with a Hexa-C frame, which ensures precision in guiding the movable ram, this fully electric machine, powered by the Bluedrive system, is capable of faster bending and, at the same time, allows energy savings thanks to its economical operation. Supplied with all optional extras and accessories, this machine is the way forward for your bending solutions! Available in two standard models ranging from 35 to 50 tonnes and 1.5 to 2 metres.

Open the catalog to page 2

Main Features No need for stoppages when changing the bending speed, thereby considerably reducing cycle time Incredible precision in stopping the movable ram +/- 0.002 mm; High acceleration and deceleration ramps Hexa-C frame: high precision in off-centre bending, maintaining the advantages of the C frame; Off-centre bending, enabling load distribution Pre-loaded guidance system to maintain off-centre bending Bluedrive: Fast, Precise, Simple and Clean heavy-duty servomotors Heavy duty Servomotors No torsion is transmitted from the frame to the part in multi-station bending; Energy consumption...

Open the catalog to page 3

Approx. mass Specifications for the series BG (back-gauge) 1.1 (standard) * Specifications for the BG (back-gauge)3 series

Open the catalog to page 4

Punch Tightening Sheet metal support Back gauges Angle Measurement Safety "ADIRA/USA” Punch Holders ■ ADIRA Punch holders with fast clamping without reversibility standard ADIRA Punch holders with fast clamping and reversibility ■ Pneumatic Punch Clamping Teda with Frontal Insertion ■ Standard 60 Base Table Kit standard Hydraulic Clamping Wila Pro ■ Pneumatic clamping for 60 mm base dies ■ 2 support arms on rail (without height adjustment, without brushes, L = 500 mm) standard 1 additional support arm on rail (without height adjustment, without brushes, L = 500 mm) ■ 2 support arms on rail (with...

Open the catalog to page 5

Rua das Lages 67 . 4410-272 Vila Nova de Gaia T.: +351 226 192 700 . [email protected]

Open the catalog to page 6

BB Series

BB Series

Catalog excerpts

All ADIRA catalogs and technical brochures