WATER EVAPORATOR
2Pages

WATER EVAPORATOR MODEL 19 The ADF Evaporator is designed to economically reduce waste disposal quantities by evaporating water from parts washer solutions, water soluble coolants, ink wastes, compressor and mop water. This is an easy to use stand alone unit which can be moved to different locations as needed. It has an 85 gallon holding capacity which will hold the tank capacity of most ADF high pressure parts washers. The evaporator can also be plumbed to be continuously filled with transfer pump, from solution or holding tank. The holding tank is constructed of stainless steel, for long life with a 2” thick insulation layer to provide a safe and efficiently operating unit. The tank bottom is sloped for easy sludge removal through a large 4” NPT fitting. A large hinged lid allows for easy access to tank interior for cleaning

MODEL 19 EVAPORATOR PART NUMBER Voltage Control Voltage Tank Capacity Construction: Tank Material 304 Stainless Steel Carbon Steel Outside Sheet Metal And Structure Tank Insulation Tank Design Sloped bottom for easy clean-out and sludge collection Exhaust Vent Blower Type Heat Exchanger 3.5KW Electric Heaters with incaloy elements Evaporation Rate High Limit Temperature 200,000 BTU Gas Burner 12 Gallons per hour To maintain tank liquid at constant temperature Switch Level Switch Low liquid level shut off 4” NPT pipe threaded externally Oil Overflow Outlet Dimensions** 1-1/2” NPT 31” Wide x...