Catalogs >
ADELSYSTEM >
FLEX28024B

FLEX28024B
1Pages

Catalog excerpts

Input: single-phase: 230 – 400 – 500 Vac Output: 24 Vdc 60°C Efficiency up to 89% Strong overload without switch-off, up to 50% Flexible Power continuity: from 240 to 336 W “Power Good” Relay Three mode of output protections: 1) Hiccup mode 2) Continuous Out Mode 3) Manual Reset DIN Rail Mountable Extremely small size 3 Years warranty Input Data Nominal Input Voltage (2 x Vac) Manual select Input from 230 to 400-500 Input Voltage range: (230) (400-500) Inrush Current (Vn and In Load) Frequency Input Current (230 – 400 – 500 Vac) Internal Fuse External Fuse (recommended) Output Data Output Voltage (Vn) Factory Setting 3% Adjustment range (Vadj) Start up with Strong Load (capacitive load) Turn-On delay after applying mains voltage Continuous Current at 24 V < 40°C (In) Continuous Current at 24 V < 50°C (In) Continuous Current at 24 V < 60°C (In) Power Boost Current at 24 Vdc 60°C(In) Current max. Overload  4Vdc (permanent) Maximum Short Circuit Current Icc Hiccup mode: Max 2 sec. Continuous Mode Hold-up Time ( min. Vac) ) Vn In 40°C Residual Ripple Efficiency Over temperature Protection Short-circuit protection Dissipation power load max (W) Over Load protection Over Voltage Output protection Parallel connection Power Good Contact rating (EN60947.4.1): Max. DC1: 30 Vdc 1 A; AC1: 60 Vac 1A Min.1mA at 5 Vdc 24 Vdc 22 – 27 Vdc 50.000F 1 sec. (max) 14 A 12 A 10 A In 60°C x 1.5  3 min. Imax=In60°Cx(1.8 -2.2) 30 A Typ. 20 msec  80 mVpp  89 % Yes. Shut-down output and automatic restart. 1° Manual Reset 2° Hiccup Mode 3° Continuous Out Mode 40 Yes Yes (typ. 35 Vdc) Yes. “Easy Parallel” Ambient Temperature Storage Humidity at 25 °C, no condensation General Data Isolation Voltage (In / Out) Isolation Voltage (In / PE) Isolation Voltage (Out / PE) Protection Class (EN/IEC 60529) Reliability: MTBF IEC 61709 Pollution Degree Environment Connection Terminal Blocks Screw Type Protection class Dimension (w-h-d) Weight The CE mark in According to EMC 2014/30/UE and Low voltage directive 2014/35/UE. Electrical Safety In compliance to UL508. EN IEC 61010-2-201:2018 According to IEC/EN 60950 (VDE 0805) e EN 50178 (VDE 0160) for assembling device. The unit must be installed according to IEC/EN 60950.Input / Output separation: SELV EN60950-1 and PELV EN 60204-1. Double or reinforced insulation. Standards Conformity EN 60204-1 Safety of Electrical Equipment Machines Output derating Curve Continuous Load Output Voltage vs. Output Current, typ. Out Voltage Resistive load Min permissive load Climatic Data Ambient Temperature operation 3000 Vac 1605 Vac 500 Vac IP 20 > 500.000 h 2 2,5 mm2 (24 – 14 AWG) I with PE connected 72x115x135 mm 0.85 kg approx.

Open the catalog to page 1