DPY353 Monitoring: State of charge, Charge Conditions, Charging Current Alarm: Back Up, Fail system, Fail Battery Diagnosis condition Charge Conditions: Recovery, Bulk, Absorption, Float, Boost Push Button for: Start CBI from Battery” Select Charging Current Battery, Select State Off Charge Acoustic Information Push Button for: • Start CBI from Battery” • Select Charging Current Battery, • Select State Off Charge Simple and intuitive user interface Low power: <10 mA/ IP65 Wall Mount General The DPY353 is a robust and versatile multifunction display that allows monitoring the state of Adel System devices connected in an ADELBus network. It is equipped with LED wide viewing-angle screen which guarantees an optimum visibility in any operating condition. The user interface is clear, intuitive and allows configuring and managing ADELBus network through its interface by remotely monitoring connected devices. It is possible to connect easily and directly to CBI’s devices. The device can monitoring: the state of charge, the battery capacity and the alarms. True Push button switch, it is possible turn On the CBI without Input main but only battery. Feature Through the ADELBus network (Adel System network) it manages all the connected devices: Monitoring It is possible to monitoring the: Charging states of the CBI device Mains or Backup CBI condition Fail Alarm Diagnostic function State of Charge Battery (SOC) Charging Current Technical Data Input Data DC Input Voltage range (Vdc) Power from: External Recommended Fuse Current consumption ON typ. Maximum current consumption with backlight 100% Ambient Temperature Storage Humidity at 25 °C, no condensation Vibration (operation) IEC 60068-2-6 Shock IEC 60068-2-6 General Data Protection Class (EN/IEC 60529) Reliability: MTBF IEC 61709 Front panel only IP65; Rear IP32 > 700.000 h (Automatically Switch Off Beck Light after 30 sec) III Polycarbonate 65 x 40 x 7 0.1 kg approx. 28 mm Protection class Housing material Dimension (w-h-d) mm Weight Hole Immunity and Emission The CE mark in conformity to EMC 2014/30/EU: Electromagnetic Compatibility Directive; 2014/35/EU: Low Voltage Directive; ROHS 2011/65/EU: Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment (RoHS), as amended by 2015/863/EU • EMC Immunity: EN61000-6-2 • EMC Emission: EN61000-6-3 According to: • Electrical Equipment for Machinery EN 60204 • Electrical safety (of information technology equipment) IEC/EN EN62368-1. • Safety requirements for electrical equipment for measurement, control and Laboratory use IEC/EN 61010 User Interface Display Screen Type Controls Keyboard Data Connection Aux1: Input – Output Ambient Conditions Ambient Temperature operation All specifications are subject to change wi