DPY351 Manages all device ADELsystem. Main functions: • Alarms management IIoT (Cloud) • Webserver Protocols: SNMP, MODBUS TCP, MODBUS RTU, SAE J1939, MQTT (Cloud) Inputs:N°2 Digital Input; N°1 Temperature Output: N°1 isolated 3.5" high-brightness LCD display with 160º viewing angle Anti-reflection coating for improved visibility in direct sunlight Simple and intuitive user interface Low power: 130 mA/ 1.6W typ. IP65 General DPY351 is a robust and versatile multifunction display that allows monitoring, configuring and managing the Adel System devices connected in an ADELBus network. It is equipped with a high-brightness and wide viewing-angle 3.5’’ TFT screen which guarantees an optimum visibility in any operating condition. The user interface is clear, intuitive and allows configuring and managing ADELBus network through its Ethernet interface by remotely monitoring connected devices, using the SNMP and Modbus TCP protocols. The configuration of the Ethernet connection is very straightforward and can be done by means of the embedded webserver or the intuitive user interface. The device IP addressing can be static or dynamic using the DHCP protocol. This makes the connection of a DPY351 to a LAN very easy. It is possible to connect several devices in chain together, up to 50. Feature Through the ADELBus network (Adel System network) it manages all the connected devices: Monitoring It is possible the monitoring of the input and output data, peak current, peak voltage, all the battery parameters such as temperature, State of Charge, etc… Configuration With the DPY351, it is possible to modify the parameters of any device connected: DC Ups, Power Supply and Battery Charger. Alarms management All the alarms present on the single device are immediately reported. History The history parameters are recorded inside each device. The DPY351 allows inspecting all the historical parameters of each single device. Logging Actions that are coordinated among the devices connected can be programmed, thus automating the system. Web server It is possible configure and drive the device by Own Server Event Actions that are coordinated among the devices connected can be programmed, thus automating the system. Technical Data Input Data DC Input Voltage range (Vdc) Power from: Power from: External Recommended Fuse Current consumption ON typ. (backlight 30%, MODBUS* on, relay off) Current Consumption Current Consumption Sleep mode Maximum current consumption with backlight 100%

Maximum current consumption with backlight 0% 0.10A (72VDC, MODBUS*, Ethernet and relay on) 0.22A (9VDC, MODBUS*, Ethernet and relay on) 0.07A (36VDC, MODBUS*, Ethernet and relay on) Display Screen Type Resolution Brightness Orientation Backlight (life time) TFT LCD display, 16bit color (64k colors) 320 x 240 pixels 3.5 Inch 800 cd/m2 Landscape LED, white (>20000h) Controls Keyboard 4 tactile buttons, backlight Data Connection Aux1: Input temperature sensor Aux2: Ethernet Protocols: Aux3: CAN Communications Aux3: RS485 : MODBUS lines fully loaded with 32 unit loads. Aux4: USB 2.0 device, full...