Catalogs >
ADELSYSTEM >
DFX6012A

DFX6012A
1Pages

Catalog excerpts

DIN Rail and wall mounted Extremely small size Output Data Output Voltage isolated DC Voltage (Vn) Adjustment range (Vadj) Start up with Strong Load (capacitive load) Turn-On delay after applying mains voltage Continuous Current -25 - +55°C In Continuous Current +55 - +70°C In Power Boost Current at 12 Vdc 55° C In Max Short Circuit current (Icc) Enduring Short Circuit current RMS max. Residual Ripple (with nominal value) Peak Parallel connection to increase power Series Connection Redundancy Connection Overload, overvoltage and short-circuit protection Internal Fuse (slow – blow, Internal) External Fuse (recommended) External Circuit Breaker (recommended) Wide temperature range: -25 to 70°C Inrush Current limitation (Vn and In Load) I2t Hold-up Time (Typ.) Nominal Input Voltage (2 x Vac) AC Input Voltage range (Vac) DC Input Range AC Frequency DC Frequency Current consumption (Approx..) Flexible power continuity up to 65 W Input Data Wide input range: 100 – 240 Vac For industrial and residential applications 12 Vdc  3% 10.5 – 14.5 Vdc  30.000F 1 sec. (max) 4.5 A Derating 2%/K 6 A  3 min. 6A 6A  100 mVss  150 mVss No Yes (max four device) Yes Primary/secondary isolation Pollution Degree Environment Insulation voltage (IN/OUT) Insulation voltage (Input / Earth, PE) Insulation voltage (Out Load / Earth, PE) Galvanic isolation to: EN 62368 and EN 50178 Degree of protection (EN 60529) Yes 2 4000 Vac 2000 Vac 500 Vac Safety extra-low output voltage Uout IP20 Norms and Certifications CE mark in conformity to EMC 2014/30/EU: Electromagnetic Compatibility Directive; 2014/35/EU: Low Voltage Directive; ROHS 2011/65/EU: Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment (RoHS), as amended by 2015/863/EU; EMC Immunity: EN610006-2; EMC Emission: EN61000-6-3, EN 55022 Class B Approval CE mark UL/cUL (CSA) approval Mechanics Data Screw type connection Connections Supply Input: L, N: 1 phase Connections Output: +, Protection class MTBFat 40°C Housing material Dimension (WxHxD) DIN 43880 Weight (approx.) Efficiency Efficiency at Vout rated, Iout rated, approx. Power loss at Vout rated, Iout rated, approx. Power loss [W] during no-load operation maximum Closed-loop control Dynamic mains compensation (Vin rated ±15 %), max. Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ. Load step setting time 10 to 90%, typ. Load step setting time 90 to 10%, typ. Protection and monitoring Output over voltage protection Short-circuit protection Over Load capability Over Voltage Output protection Status output voltage OK Hiccup. Shut-down output and automatic restart. Hiccup. Shut-down output and automatic restart. 150% In typ. 200ms Yes (typ. 16.5 Vdc) Green LED Environmental Conditions Ambient Temperature operation Ambient Temperature Storage Humidity at 25 °C in acc. to EN 60721 Vibration (operation) IEC 60068-2-6 -25 up to +70 °C -40 up to +85 °C 95 % no condensation <15 Hz,amplitude  2.5mm <15Hz-150Hz, 2.3g 90 min. 30g in all directions

Open the catalog to page 1