Catalogs >
ADELSYSTEM >
BAT3.4VRLA

BAT3.4VRLA
1Pages

Catalog excerpts

Battery Bank Maintenance free lead AGM, VRLA technology Output: 24 VDC 3 Ah Protection: Fuse Connection with screws Short circuit Protection IP20 Wall Mount with screws Din Rail Mount Electrical Diagram Battery Bank for DC-UPS “All In One”. Lead AGM, VRLA technology, maintenance-free lead-acid batteries whit serial fuse. Simple connection with screws for Wall mount or DIN rail. Technical Data Nominal Input Voltage Battery Type (tpy) Dimension (WxHxD) Protection Fuse Recovery Fuse 24 VDC Lead AGM 3 Ah 67x60x134 mm Flat type Mini 25 A Flat type Mini 25 A Charging Data End-of-charge Voltage (trickle charge) 20°C End-of-charge Voltage (trickle charge) 30°C End-of-charge Voltage (trickle charge) 40°C End-of-charge Voltage (Cycle use) 0 - 40°C Max. permissible charging current Max. permissible charging current (Cycle use) Wall Mount Discharging Data Battery disconnection from CBI Max. permissible Discharging current Self-discharge rate at 20 °C General Data Protection Degree (EN/IEC 60529) Protection Class Connection Terminal Block Screw Type Dimension (WxHxD) Weight DIN Rail Wall mount Climatic Data Ambient Temperature operation Ambient Temperature Storage Humidity at 25 °C, no condensation Norms and certifications The CE mark in According to EMC Directive 2014/30/UE and Low voltage Directive 2014/35/UE. Electrical Safety In compliance to UL508, EN IEC 61010-2-201:2018 According to EN 60950-1/VDE 0805 (SELV) and EN 50178/VDE 0160 (PELV). EN IEC 62368-1: 2014/AC:2015 Buffering time (min) Battery Size Load 1.5 A Load 3 A Load 5 A Load 7.5 A Load 10 A Load 12 A Load 15 A Load 20 A Accessory Protection Fuse Flat Type Mini 25 A All specifications are subject to change without notice BAT 3.

Open the catalog to page 1