BAT12Wh (Li-Ion) ) Battery Bank Feature Battery Bank for DC-UPS “All In One”. Lithium-ion technology, maintenance-free. For 12V or 24V field. Simple connection with screw terminals for Wall mount or DIN rail. The device integrates CAN protocol communication to transfer and receive all data in ADELBus field. Technical Data Nominal Input Voltage Automatic determination of input voltage Max Charging Voltage Internal Protection Fuse External Protection Fuse (recommended) Output Short Circuit and Overload Communication Battery Battery Type Battery Voltage Energy Life Cycle Typical Charging Time (recover to 90% capacity) Battery Protection 12 or 24 VDC At first power-up 28 Vdc 7.5 A 10 A Automatic Protection CANopen 2 cells Li-Ion, 2 Ah 3.7 Vdc 12Wh 1500 charge cycles (50°C) 30 min Deep Discharge, OverCharge, Short Circuit protection 12V system “DC Output” Output Voltage Max. Power 12V system “Charging Data” End-of-charge Absorption charging current (Max.) 12V system “Discharging Data” Battery disconnection from CBI Nominal Discharging current Max. permissible Discharging current Self-discharge rate at 20 °C Output Voltage Max. Power End-of-charge Absorption charging current (Max.) Maintenance free Li-Ion technology Hi-Tech Power Boost for Out: 12 or 24 V 12Wh Protection: Over-current, Over-voltage, Over-charge, Deep-discharge, Short circuit Balance Cell Function High reliability : Long-life battery pack Auto Testing for the battery State ADELBus “CAN” connection Manual Power Off Switch Multicolor Indicator IP20, Din Rail and Wall Mount 54 x 90 x 55 mm 1.5 KV 0.4 kg Yes Yes Dimension (WxHxD) DIN 43880 Surge Protection Weight DIN Rail Wall mount Data and Communications AUX1 ADELBus (CAN) Remote monitoring data: Protocol: Climatic Data Operating ambient temperature Recommended storage temperature Recommended storage charge level Humidity at 25 °C, no condensation Norms and certifications CE marking according to EMC Directive 2014/30/UE and Low Voltage Directive 2014/35/UE. Electrical Safety In compliance with UL508, EN IEC 61010-2-201:2018 According to EN 60950-1/VDE 0805 (SELV) and EN 50178/VDE 0160 (PELV). EN IEC 62368-1: 2014/AC:2015 Buffering time Load Load 0.5 A Load 1 A Load 1.5 A Load 2 A Load 2.5 A Load 3 A Load 3.5 A Load 4 A Load 4.5 A Load 5 A Load 5.5 A Load 6 A 24V system “Charging Data” 24V system “Discharging Data” Battery disconnection from CBI Nominal Discharging current Max. permissible Discharging current Self-discharge rate at 20 °C Indicators and Command LED Charge ON LED Charge OFF LED Battery State ON “Green” LED Battery State Constant Flashing “Green” LED Battery State OFF LED Battery State “Red” Push Button to turn ON and OFF the Battery Bank General Data Protection Degree (EN/IEC 60529) Protection Class Screw type terminals: Torque: < 23 VDC 2.5 A 3A 35uA (typ) 1.5% x month Battery Charging Not Charging Batt. Capacity > 90% Battery Charging Low Battery Fault Press for 1 sec. Release the button IP 20 III 0.2 - 2.5 mm2 (24 – 12 AWG) 0.6 - 0.8 Nm

Electrical Diagram Mounting instruction DIN Rail Mount and Wall Mount All specifications are subject to change without notice BAT 12Wh LI-ion_7.docx