Catalog excerpts
BS2-TS 4G-Equipped, Solar-Powered Data Collector & Transmitter for Traffic Management Applications • ADEC’s Base Station 2 is a data aggregator that provides the key link between the ADEC passive infra-red (PIR) traffic detectors TDC1-PIR and the ADEC traffic cloud: The BS2 gathers the traffic data from up to three TDC1-PIR detectors and forwards them to the traffic data cloud. The BS2 is battery operated and provides power to up to three TDC1-PIR detectors as well as its own circuitry using the attached solar panel. It can be mounted and properly aligned on any stable structure, such as a street light pole, using the attached bracket. Typical Applications The data aggregator system has been developed specifically for operation of up to three TDC1-PIR traffic detectors monitoring the traffic of up to three lanes. It is designed for both permanent as well as temporary installations where flexibility is key: Permanent or temporary traffic measurement Both for urban and inter-urban applications Feeding traffic models using up-to-date, real-world data Single-vehicle granularity accessible via web-browser Near unlimited traffic data storage via ADEC traffic cloud Autonomous Operation The power necessary to operate up to three TDC1-PIR traffic detectors is provided from the built-in battery which is recharged from the attached solar panel Secure Internet Storage & Access Specifically designed for integration into the Internet-of-things (IoT) via ADEC traffic cloud. Single vehicle traffic data is accessible through simple Internet browser, mobile phones etc. as well as any third-party software via easy-touse web-interface Built-in 4G Modem Propagates single vehicle data (speed, length and vehicle class and counts) or averaged (interval) data to the Internet-of-Things (IoT) and allows setup/management via simple Internet connection, including mobile phones Built-in Antenna Integrated antenna to communicate with the mobile phone data network Inexpensive Operation (Western Europe) Low-cost operation and data plan account management online available Minimal Wind Load (10W Version) Thanks to small size of only 355 x 265 x 90 mm, 14” x 10.5” x 3.5” (H x W x D) Typical application Principle of Operation The BS2 gathers individual-vehicle traffic data from up to three directly connected TDC1-PIR traffic detectors and forwards that data to the ADEC traffic cloud. The data are stored in the cloud and can be accessed, downloaded and visualized both through any webbrowser. The traffic data cloud provides easy access from any third-party traffic management or modelling software through standard web APIs. Browser-view of hourly averaged volume and speed values ADEC Technologies AG ● Gublenstrasse 1 ● CH-8733 Eschenbach ● Sw
Open the catalog to page 1Technical Specification Optional Accessories Pole Mount Adapter (PMA) 10 Ah for 5 days autonomous operation Solar Panel A bracket for mounting the BS2 on a round pole is available as separate accessory (not included in standard delivery). TDC-PMA: 14101 TDC1-PIR non-intrusive traffic detector Weather-proof plastic enclosure Operating Temperature Low-power, multi-channel PIR traffic detector for precise acquisition of individual vehicle parameters, preassembled with 2m cable and fitting cable plug The 3-way junction box extends the RS 485 bus and allows additional detectors be connected...
Open the catalog to page 2All ADEC Technologies catalogs and technical brochures
-
BS2-TS
2 Pages
-
ADEC Technologies
2 Pages
-
TDD1-PIR30
2 Pages
-
Traffic Management
17 Pages
-
TDC3
2 Pages
-
TDC2
2 Pages
-
Traffic Data Collection
33 Pages
-
TDC1 Series
2 Pages