Additel 761-LA/MA/HA
6Pages

Pressure / Process Calibration Equipment Additel 761 Automated Pressure Calibrators Selection Guide Model Features Pressure Range Differential Pressure Gauge Pressure 0.05 to 8 bar.a 0 to 25 bar 0.1 to 26 bar.a 0 to 40 bar 0.1 to 41 bar.a (1.2 to 115 psi.a) (0 to 375 psi) (1.7 to 390 psi.a) (0 to 600 psi) (1.7 to 615 psi.a) Absolute Pressure Barometric Pressure Temperature Compensated Built-in Electrial Pump Built-in Filter Built-in Liquid Trap Source 0 to 22mA Measure mA or V Measure external pressure module 24V Loop power Pressure switch test HART Communication Corporate Headquarters 22865 Savi Ranch Parkway Ste F Yorba Linda, CA 92887, USA Phone: 714-998-6899 Fax: 714-998-6999 Email: sales@additel.com Salt Lake City Office 802 Bamberger Dr, Suite C American Fork, UT 84003, USA Phone: 801-756-5570 Fax: 714-998-6999 Email: sales@additel.com

Pressure / Process Calibration Equipment Additel 761 Automated Pressure Calibrators Fully automated pressure calibrator with built-in pressure generator / controller to as high as 600 psi (40 bar) or as low as 0.01 Pa (0.00004 inH2O) 0.02%FS accuracy Dual pressure modules Built-in filter and liquid trap with venting system prevents contamination of the calibrator Portable (12.4 lb) OVERVIEW With a built-in high performance electronic pump and precision pressure controller, the 761 series portable automated pressure calibrators provide a turnkey solution for calibration of gauges,...

Pressure / Process Calibration Equipment FEATURES Pressure Range Pressure generated by built-in pump and controlled automatically from 90% vacuum to 600 psi (40 bar) Pressure measured with external pressure modules (160 series) to 10,000 psi (700 bar) Accuracy (Fully temperature compensated) 0.02%FS 0.05%FS (ADT761-LLP) 0.01%FS (ADT761-BP) Control Stability <0.005%FS ADT761-LLP: < 0.05 Pa (0.0002 inH2O) Contamination prevention system Built-in filter and liquid trap with venting system prevent contamination of the calibrator Solid particles can be blocked by built-in filter A small amount...

Pressure / Process Calibration Equipment SPECIFICATIONS Control Stability <0.005%FS; ADT761-LLP: < 0.05 Pa (0.0002 inH2O) Pressure Connections Pressure connection: ADT761-L/M/H/LA/MA/HA One ADT100-761 Hose Test Kit with quick connector 1/8 BSP Female on calibrator Two 1/4NPT(or 1/2NPT, 1/4BSP, M20×1.5) female hand-tight connectors on the external pressure manifold Pressure connection: ADT761-LLP/BP Stainless steel hose barb fitting Task Manual External Pressure Module Connection Accepts Intelligent Pressure Module Electrical Connection 0.156 inch (Ø4mm) banana sockets Documenting and data...

Pressure / Process Calibration Equipment Additel 761 Automated Pressure Calibrators SPECIFICATIONS Pressure Ranges Type Gauge Pressure Pressure Range Low/Differential Pressure Gauge/Absolute Pressure Barometric pressure * One year accuracy (including yearly stability) except ADT761-LLP which is 0.05%FS calibration accuracy and 0.05%FS yearly stability. * * Additel 761 calibrators support 160 series intelligent digital pressure modules that are available for gauge, vacuum and absolute pressure from -15 psi to 10,000 psi (-1 bar to 700 bar). Accuracy from 0.025%FS includes operation over 14°F...

Pressure / Process Calibration Equipment Additel 761 Automated Pressure Calibrators ORDERING INFORMATION Model Number ADT761 Pressure range: See pressure range table. Pressure port type on External Pressure Manifold: N- 1/4NPT female N2- 1/2NPT female B- 1/4BSP female M-M20X1.5 female Accessories (included) Optional Accessories External Pressure Manifold (ADT106) (Except 761-LLP) 9818 110V/220V external Power adapter 9722 Chargeable Li-ion battery 9022 Test Leads for calibrator 9020 Short circuit cable 9907 Carrying case for 761 calibrator and accessory External Pressure Manifold (with two...