LABMASTER 25 The LABMASTER 25 is our most compact medical incinerator, ideal for the disposal of laboratory and hospital waste. Primary Chamber CHAS QUALITY ASSURED FIRM QUALITY ASSURED FIRM One of our smallest low capacity machines within our family of incinerators with a front loading design. The Addfield Labmaster 25 is a 10kg capacity incinerator ideal for safe disposal of medical waste including laboratory, clinical and hospital, with a chamber volume of 0.04m3. The machine is made from lightweight, durable materials making it a more versatile machine that can be trailer mounted and used as a mobile incineration unit. Machine Specification External L x W x H (mm) Weight (approx tonnes) Nominal Burn Rate Door Aperture Thermal Capacity (kW) Fuel Types Control Panel Fully insulated internal lining with a total thickness of 75mm. 50mm hot face concrete lining and 25mm block insulation board lining, with a coated protective zirconia paint finish. Manually opening, securely locking, access lid. Automatic temperature controlled on-off waste ignition burner complete with internal air fan. Secondary combustion burner air fan, automatically controlled distribution to its designated area. One temperature sensor mounted point. Secondary Chamber Fully insulated internal refractory lining. Constructed from 80mm high grade, low thermal mass insulation. One secondary chamber burnout burner, temperature controlled on-off, complete with air fan. Integrated combustion burner air fan with automatically controlled distribution to its designated areas. One temperature sensor mounting point at the top of the chamber, ensuring the chamber reaches the necessary 850°C/1100°C minimum. Waste Type Clinical Waste Treated Waste Anatomical Waste Cytotoxic & Cytostatic Waste Offensive/Hygiene Waste *We reserve the right to change the specification, dimensions and quality of materials from time to time, so long as the alteration is minor or an improvement to the said product. Medicinal Waste Domestic (municipal) Waste

LABMASTER 25 Waste Loading and De-Ashing The Labmaster 25 is our most compact incinerator, with a maximum load capacity of 10kg. Once the process of incineration has been completed, the removal of the ash residue can be extracted using a shovel or spade. The ash residue left will be 3-5% from the original waste entered into the machine. This remaining ash can then be disposed of safely following local environmental guidelines. The Addfield Difference • Pre-fabricated robust mild steel casing, seam welded and suitably stiffened/ braced where necessary. • Lightweight resilient refractory fibre insulated...

CHECKED APPROVED CHECKED APPROVED SIDE VIEW DOOR OPEN PLAN VIEW CHECKED APPROVED 1486 793 CHECKED APPROVED COMMENTS FRONT VIEW This drawing and any information or descriptive material set out on it are the confidential and copyright propertyof Addfield Enviromental Systems, and MUST NOT BE DISCLOSED, COPIED, LOANED in whole or part or used for any purpose without the written permission of Addfield Enviromental Systems. Addfield Environmental Systems LTD ISOMETRIC VIEW CHECKED APPROVED COMMENTS Addfield Environmental Systems LTD T: +44 (0)1543 571 280 Unit 9, Zone 4 F: +44 (0)1543 571 173 Burntwood...