1. Catalogs
  2. ADD Grup
  3. Communication Module for single phase and three phase meters

Communication Module for single phase and three phase meters
1 /2Pages

Communication Module for single phase and three phase meters

Communication Module for single phase and three phase meters
1 /2Pages

Catalog excerpts

Communication Module for single phase and three phase meters-1

COMMUNICATION MODULE BASED ON UP-TO DATE ADDAX TECHNOLOGY FOR RESIDENTIAL METERING CM71.X COMMUNICATION MODULE FOR SINGLE-PHASE METERS DESIGNED FOR USE IN UP-TO-DATE AMI/AMR SYSTEMS  2G bands: GSM 850, EGSM 900, DCS 1800, PCS 1900  3G bands: B1 (2100 MHz), B2 (1900 MHz), B6 (800 MHz), B8 (900 MHz)  4G bands: B20 (800 MHz), B3 (1800 MHz), B7 (2600 MHz)  CDMA2000 band: 450 MHz  Direct communication upstream with the head-end system  Data transmission: by schedule or on request from the head-end system  SMA connector for external antenna M-BUS INTERFACE*  Wireless M-Bus  Baud rate up to 38400 bps  EN 13757 series standards compliance  Communication downstream with: - 3rd party HAN devices, such as water, gas and heat meters - Customer Interface Units - M-Bus adapters to the customer appliances  Data transmission: by schedule or on request from the head-end system  SMA connector for external antenna  Communication downstream to interconnect meters within the same metering cabinet or in close proximity and a meter with a 3GPP modem. This provides possibility to use a single communication module to transmit data from all these meters  Data transmission: on request from the head-end system for a specified meter USB INTERFACE  USB 2.0 Full Speed compatible  Baud rate 12 Mbps  Provides link between the meter and communication module POWER LOAD CONTROL* PLACEMENT UNDER METER TERMINAL BLOCK COVER  2 built-in low-power relays, which control external contactors ADDITIONAL POWER SUPPLY*  Battery, which provides possibility to send a “last gasp” event to the head-end system in case of power failure POWER CONSUMPTION  Self-consumption in stand-by mode: not more, than 1.5 W  Self-consumption during transmission: not more, than 2 W DESIGN  Interchangeable modules  Installation under meter terminal block cover, which may be sealed  Housing made of light-tone non-flammable polycarbonate * optional, depending

 Open the catalog to page 1
Communication Module for single phase and three phase meters-2

COMMUNICATION MODULE BASED ON UP-TO DATE ADDAX TECHNOLOGY FOR RESIDENTIAL METERINgI AX ADD ordering information CM MODEL * with pulse output CONTACT US 36, Dragomirna str. Kishinev, MD-2008, Republic of Moldova Phone : +373 (0) 22 930012 Fax : +373 (0) 22 930012 E-mail : [email protected] Web : www.addgrup.com © 2014 "ADD GRUP". All Rights Reserved

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.