Catalogs >
Adash >
A4801 - Sensor Simulator

A4801 - Sensor Simulator
1Pages

Catalog excerpts

ADASH Ltd., Czech republic, tel.: +420 596 232 670, fax: +420 596 232 671, email: info@adash.cz For next technical and contact information visit www.adash.net, www.adash.cz Adash 4801 - Sensor Simulator Signal Generator for Testing Application: .. Generation of well-defined test signal for systems checks .. Check of functions of measurement system .. Check of correct calibration of measurement system .. Check of correct functions of cables (on-line systems) Characteristics: .. Output of test vibration signal .. ICP® powering from measurement system .. LED indication of ICP® power .. BNC and MIL C5015 standard output connectors Description: The 4801 device simulates a standard ICP® vibration sensor with sensitivity of 100mV/g. It does not need any extra external power supplying. The output signal is the addition of two sine waves of 0.51g / 80Hz and 0.50g / 8kHz. This device so enables to test and set systems, instruments and cables for vibration measurements in very simple way. Also is very suitable for setting of control systems. The output signal is simultaneously connected to both output connectors. The device does not contain an internal reset circuit. If necessary reset the device manually (unplug / plug in the cable). ICP® is registered trademark of PCB Piezotronics, Inc. .. Data Sheet .. Technical specification: Output of RMS: 51 mV / 80 Hz + 50 mV / 8 kHz 5.0 m/s2 / 80 Hz + 4.9 m/s2 / 8 kHz 0.51 g / 80 Hz + 0.50 g / 8 kHz 10 mm/s / 80 Hz 0.39 in/s / 80 Hz Connectors: BNC, MIL C5015 Indication: LED indication of ICP® supplying Supply: ICP® from measurement system Dimensions: 90 x 35 x 60 mm Weigh: 115 g Protection: IP 20

Open the catalog to page 1