A4300 VA3 Pro
1 / 3 PagesView full catalog
A4300 VA3 Pro
Product catalog summary
Introduction
The A4300 VA3 Pro is a portable 3-channel vibration analyzer designed for machinery diagnostics. It features two signal inputs and one tacho/trigger input, with the capability to connect to a triaxial sensor for simultaneous measurement across all three channels. The device includes an expert system for automatic fault detection, such as unbalance, looseness, misalignment, and bearing faults.
The A4300 VA3 Pro is a portable 3-channel vibration analyzer designed for machinery diagnostics. It features two signal inputs and one tacho/trigger input, with the capability to connect to a triaxial sensor for simultaneous measurement across all three channels. The device includes an expert system for automatic fault detection, such as unbalance, looseness, misalignment, and bearing faults.
Key Features
- Lightweight at 780g and designed for one-handed operation.
- Battery life exceeds 10 hours, suitable for long route measurements.
- Includes a non-contact IR temperature sensor and LED stroboscope/torch.
- Configurable with optional modules like analyzer, route, balancer, recorder, run up, or ultrasound.
- Compatible with VA4 Pro for route measurements.
Data Processing and Safety
- Available in an intrinsically safe version for hazardous areas.
- Features a heavy-duty aluminum case and removable Li-Ion battery pack.
- Real-time FFT, DEMOD-ENVELOPE analysis, ACMT for low-speed bearing analysis, and more.
Technical Specifications
- Input channels: 3 AC, ICP® power supply, 3 DC for process values, 1 TACHO for external trigger.
- Input range: AC +/- 12 V peak-peak, DC +/- 24V.
- AD conversion: 24 bit, 64 bit internal signal processing.
- Dynamic range S/N: 120 dB.
- Frequency ranges: 0.5 Hz - 25 kHz.
- Sampling mode: Fully simultaneous for 3 channels.
- FFT resolution: 25 to 25,600 lines.
- IR temperature measurement range: -70˚C to +380˚C.
- Operating temperature range: -10˚C to +50˚C.
- Power: Battery operation for 10 hours, AC 230 V.
- Dimensions: 230 x 82 x 32 mm.
See more
Catalog excerpts
MASTER THE LANGUAGE OF YOUR MACHINERY
Open the catalog to page 1
MASTER THE LANGUAGE OF YOUR MACHINERY The A4300 VA3 Pro is the newest addition to our range of portable devices for vibration diagnostics. There are 2 signal inputs and 1 tacho/trigger input. Input 2 offers connectivity to a triaxial sensor, therefore all 3 channels can be measured simultaneously. The expert system developed by Adash can automatically detect machine faults such as unbalance, looseness, misalignment and bearing faults. There is a non-contact IR temperature sensor (for immediate bearing temperature measurement) and a LED stroboscope/torch. The A4300 VA3 Pro is designed for one-handed...
Open the catalog to page 2All Adash catalogs and technical brochures
A4801 v2 Sensor Simulator2 Pages
A4900 Vibrio M3 Pages
A4300 VA3 Pro Ex4 Pages
Adash Brochure17 Pages
Omega_manual32 Pages
Omega_Data_sheet4 Pages
A38004 Pages
A4404 SAB4 Pages
A4910 Lubri4 Pages
A4900 - Vibrio M Ex4 Pages
VA5 Pro3 Pages
A37163 Pages
Related Searches
- Analysis software solution
- Process software
- Cloud-based software
- Monitoring software solution
- Measurement software
- Machine software
- Condition monitoring module
- Digital monitoring module
- Storage software
- Adash vibration meter
- Online monitoring module
- Vibration sensor
- Benchtop monitoring system
- Vibration monitoring device
- Alarm software
- Compact monitoring module
- Data acquisition monitoring module
- Machine monitoring module
- Mechanical software
- Adash portable vibration meter
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.