NT 800-5
4Pages

NT 800-5 Flexible low voltage tester for the test of extra-large scale UUTs Innovative test technology for cable harnesses in installed condition Design: ■ Distributed test system consisting of: ▪ Base unit with control unit and measurement electronics ▪ TPUs (Test Point Units): The remote-controlled TPUs can be arranged in a satellite-like manner around the test object. The adapter cables are connected to the TPUs to adapt UUT connectors. ▪ ATA (Active Termination Adapter) for direct adaptation of the UUT connectors. ■ High modularity in hardware and software ■ Test point expansion on „plug and play“ principle possible Benefits: ■ Reduction of production costs, through parallelization of electrical test and other manufacturing steps in the production process. ■ Reduction of the number of adapter cables as well as adapter cable lengths by up to 70%. ■ Space saving due to miniaturization of the test system ■ High degree of automation in test program generation Application: ■ Pre- and final-assembly of aerospace vehicles ■ Supplying industry of components like fuselage parts, wings, tail units, galleys and their (su

NT 800-5 NT 800-5 measuring principle / system overview Intelligent termination adapters, so-called ATAs (Active Termination Adapters), allow to reduce the number of adapter cables. The test signal is fed in at one end of a cable bundle of the UUT. The other end is terminated by one or more ATAs. A measurement loop is formed by the ATAs, via which the line resistance of each line in the cable harness is determined. Classic faults in the wiring harness, such as interruption and short-circuit of lines, are reliably detected and the fault location is determined. Comparison of the test system...

USB Ethernet Pin Number Probe Open Wire Probe OWP External programming station Server Fault location and repair Mobile operating panel Remote maintenance Reporting Documentation Measurement values Temperature Humidity Intelligent adapter cables Printer Test Point Interfaces selectable Data import Testing and programming with NT Control

Mobile cabinet Type Particular feature Type Max. test voltage Max. no. of test points Test program generation and testing with NT Control Convenient generation, editing and management of test programs as well as testing with the user-friendly software NT Control. Data exchange between a PC with NT Control and NT 800-5 takes place via network. NT Control is required for the operation of the NT 800-5 and is part of the delivery. NT Control runs on a PC* with the operating systems Microsoft Windows® 7 Pro to Windows® 10 Pro (country variants German or English). Technical features NT 800-5 Test...