ADACTECH - The art of dispensing
8Pages

Manual dispensing systems, with or without electronic control ADACBOX-BB-01, are specially designed for low viscosity products. Different types are available for cyanoacrylates (Teflon tubing), lacquers (with disposable needles), or even UV-glues (with ultraviolet protection). The product is contained in a Teflon bottle. The following capacities are available: 5, 60, 120 cm³. Small, pneumatic time-pressure controlled dispensing valve fitted with an integrated manual flow adjusting system. Control of the dispensing cycle motions by a PNP proximity switch (optional). To be used in manual or...

Volumetric Dispensing Volumetric modular dispensing valve especially designed for low to high viscosity products. The VDH-1536-SR is servo motorized and dispenses the metering volume with a high repeatability. It can be controlled by the electro-pneumatic control unit ADACBOX-SR-01 or by a customized PLC. Suitable for the dispensing of volumetric drops or stripes between 0.5 and 550 mm³. Integrated “Anti-Leakage” system, very easy installation, low maintenance costs. Volumetric modular dispensing valve especially designed for low to high viscosity products. For the dispensing of volumetric...

ADACSHOT- Series MDV-5XX-YY Micro dispensing valve for the dispensing by jet or by needle. Adjustable piston stroke and hub seat either in ceramic, hard metal or PEEK. A heating unit for temperatures up to 120° C (optional). Variable dosing parameters, cycle time adjustable up to 1,200 cycles/sec. Divers nozzles: Ø 25 to 700 µm and larger. Minimal metering volume: from 5 ηl. Suitable for viscosities up to 2‘000‘000 mPa.s depending on the model. Feeding possibilities: syringe, cartridge, reservoir or barrel. It can be controlled by ADACBOX-BB-01. ADACSHOT- Series MDV-5XX-YY for Cyanoacrylate...

Tanks and pressure pumps Capacities of 1,25 or 2,5 liters, depending on the model. Delivered with HDPE bottle or piston, safety valve, filling level control, venting pen and compressed air gauge. Rapid coupling for the feeding of compressed air. Precision manometer (optional). RES-0065-PN for all cartridge types of up to 65 cm³ RES-0350-PN for Euro cartridges Cartridge capacity depending on the model, several cartridge adapter optional: bayonet, SEMCO, M14x1 etc. Both versions delivered with safety valve, and all necessary connecting fittings, filling level control (optional). BP-3/-50/-200...

Accessories and customized solutions ADACTECH offers a wide range of accessories for its products: different nozzle and piston types, dispensing needles, supply units, nozzle heating, adjustable manifold and filter, cable, pipes, tubes, degassing units, vacuum pumps …etc. Beside the wide range of accessories, ADACTECH offers solutions according to customers’ requirements: • Manuel, semi-automatic or automatic dispensing unit • Customized nozzle units for simultaneous dispensing by multiple dispensing needles • Recipient with quick fastener and coding system • Coding systems for r

Automobile Grease/door lock DDH-3 + VDH 4 x 30 mm3 + 2 x 50 mm3 1,5 s /36 drops Industry Automobile (electric motor) Product/Part Grease/gear-wheel Cycle time 3 s/4 different stripes Industry Watch making industry Cycle time 0,001 s/1 drop Industry Automobile Dispensing valve VDH + nozzle unit Volume 2 to 5 mm3 Cycle time 0,5 s/5 drops /1 shot

ADACTECH Technologies GmbH – Our mission The ADACTECH GmbH was founded in Salzburg (Austria) in 2006 as ADACTECH Dosiertechnik GmbH, by a team of engineers specialized in high precision dispensing equipment. A personal and direct contact to our customers, combined with the highest industrial experience allows us to provide the best solutions for specific requirements. Our main concerns are our customers as well as the quality of our products. All mechanical parts, as well as the electronic controls for our products, are manufac- tured either in Austria, Germany, or Switzerland. Our Berlin...