1313 Plus Advanced 12V Spike Suppressor
1Pages

NEW ACT-1313-PLUS COMBINED 12VDC FALSE ALARM FILTER & LED POWER MONITOR Now you can easily identity and eliminate causes of false alarms by fitting the new ACT-1313-PLUS to control panels and PSU’s. Designed by retired alarm troubleshooting expert David Grant for ACT Meters (UK) Ltd, the ACT-1313-PLUS not only eliminates false alarms caused by induced AC and RFI interference but can also identify cable faults supplying DC power to motion detectors or any 12v detection devices. The ACT-1313-PLUS connects directly between the control panel or PSU’s auxiliary 12VDC supply to motion detectors or other powered detection devices. Twin terminal blocks, 2xRed+, 2xBlack- enable power cables to be grouped and connected easily. any potential DC power overload or low resistance fault on any cable connected. Green shows ‘no faults’ whereas Red indicates ‘fault exists’. If the red LED is lit, simply disconnect DC power cables one at a time to identify the troublesome circuit. How simple is that! Installing the new ACT-1313PLUS to your control panel and PSU’s as standard enhances your company’s reputation over competitors by eliminating false alarms as well as saving your valuable time and repeat call outs by instantly identifying power cable faults! If the red LED is lit with all power cables removed, this indicates that the panel or PSU DC Voltage is insufficient to power motion sensors and other detection devices effectively against false alarms. Induced AC is eliminated and RFI attenuated by up to 60dB on all DC power cables connected to the ACT1313-PLUS preventing false alarms. In addition, a bicoloured LED will instantly indicate For more information contact ACT sales or technical support on 01744 886660 or sales@actmeters.com