ULTRASONIC FLAW DETECTOR Traditional general-purpose flaw detector with long operation time and frostproof battery FEATURES •• Easy instrument setup and high efficiency inspection. •• Shockproof case of IP65 ingress protection rating. •• Anti-slipping rubberized coating of the instrument’s electronic unit case. •• Large high-contrast color TFT display with high resolution (640 x 480 pixels) allows conveniently operating with the instrument for the long time. User-friendly interface with «quick access» keys. Quick-detachable frost-resistant battery. Maximum operation time is 18 hours. Electronic unit of the flaw detector with the battery weights just 1.8 kg. Voice comments can be added to the saved results by means of the freehand Bluetooth set. USB-port for connection with PC. Traditional A-scan allowing imaging of the detected output signals, as well as undetected R-F signal (radio signal). The pulse envelope of the maximum signal is memorized on the display thus allowing conveniently adjustment of the transducer specifications. Automatic detection of the signal level and locations of the flaws when operating with the monitor level (three-level gate). Adjustable pulse repetition frequency (up to 1000 Hz). Built-in signal amplitude correction types: DGS-diagrams, TCG, and DAC-curves. Compatible with a wide range of transducers of multiple manufactures. Operating temperature range is from -30 to +55 °С. •• А1214 EXPERT – an electronic unit of the flaw detector •• Transducer D1771 4.0A0D12CL (4.0 MHz, normal) •• Transducer S3568 2.5A0D10CL (2.5 MHz, normal) •• Transducer S5182 2.5А45D12CS (2.5 MHz, angled 45°) •• Transducer S5096 5.0А45D6CS (5.0 MHz, angled 45°) •• LEMO 00 – LEMO 00 double cable 1.2 m •• LEMO 00 - LEMO 00 single cable 1.2 m •• AC-power adapter with a cable •• USB A - Micro B cable •• Calibration sampleV2/25 •• Soft cover •• Сouplant for ultrasonic inspection «ACS-gel», 0,1 kg •• Case FOUR GENERAL-PURPOSE TRANSDUCERS: S5096 5.0А45D6CS — an angled, single-crystal transducer (5.0 MHz; 45°) for non-destructive testing of the welding joints of metal objects when inspected objects have a thickness from 4 to 12 mm. S5182 2.5А45D12CS — an angled, single-crystal transducer (2.5 MHz; 45°) for non-destructive testing of the welding joints of metal objects when inspected objects have a thickness from 12 to 30 mm. When inspected objects have thickness exceeding the specified values, other transducers with different ultrasonic frequencies and angles must be used on a case-by-case basis. ACS-Solutions GmbH | Science