Bravo
5Pages

BRAVO Manual cleaning filter Finality Impurities such as sand, rust flakes, lime deposits and coarse material can damage the water distribution line and household appliances (pipes, valves, mixers, faucets, washing machines, etc.). The installation of a protection filter is the most simple and efficient alternative to avoid such problems. Bravo is a semi-automatic compact cleaning filter automatic with small dimensions, high flow rates and discharge tap for dirt. Bravo is designed with a standard filtration rating of 89 micron which retains coarse impurities from water preventing them from damaging the syste system. Operation Raw water entering Bravo flows from the inside toward the outside of the filtering cartridge. The periodic cleaning operation is easy and quick requiring the opening of the bottom valve for a time sufficient to completely remove dirt accumulated at the bowl bottom and on the ed filtering cartridge. This simple operation allows the removal of impurities both in suspension and deposited on the filter’s bottom. Bravo is easy to disassemble and the filtering cartridge is readily Key features Raw water entering Bravo flows from the inside toward the outside of the filtering cartridge. The periodic cleaning operation is easy and quick requiring the opening of the bottom valve for a time sufficient to completely remove dirt accumulated at the bowl bottom and on the filtering cartridge. This simple operation allows the removal of impurities both in suspension and deposited on the filter’s bottom. Bravo is easy to disassemble and the filtering cartri cartridge is readily accessible for fast cleaning and complete maintenance. Intended use, use conditions Bravo has been specifically designed for the filtration of cold drinking water predominantly in civil applications but it may also be used for the protection of water distribution lines in on technological applications (heating and cooling systems, industrial installations, etc.).

Maintenance and duration Bravo requires the periodic cleaning operation. This operation implies the opening of the discharge valve for some seconds. Bravo must be included in the periodic sanitization program planned for the distribution system (who has built the distribution system is in charge of this planning). As a consequence any time the distribution system is sanitized Bravo must be sanitized too. For a proper maintenance two annual inspections are recommended. includes: Bravo filter, opening key, plastic brush, instruction manual (including the conformity declaration), warranty...

Performances and tecnica datasheet Units Pressure gauge indication Filtration rating Min-max working pressure Min-max water temperature Min-max room temperature Distance from ground (D) Bravo with pressure gauge cod. FT310, FT312, FT314 Bravo without pressure gauge cod. FT300, FT302, FT304

Installation scheme 1.Water inlet • 2. Flow meter • 3. Pressure reducer • 4. Backflow preventer • 5. Shut off valve • 6. Sampling tap • 7. By- valve • 8. Bravo filter • 9. Cold water outlet • 10. Drain.

This Technical Datasheet is based on the experience of Acqua Brevetti s.r.l. and it is applied to the use in compliance with the instruction supplied by the manufacturer; any use different from those described must be authorized in a written form from Acqua Brevetti s.r.l. For a regular maintenance it is advised to enter into a contract with an authorized technical service. Acqua Brevetti s.r.l. reserves the right to any change to its products without any notification. The reproduction of this document or part of this document is forbidden. This document is property of Acqua Brevetti s.r.l.