- Partcf WASYS

TurTle Ceramic pressure transmitter with free choice of range of measurement GoPLe Ceramic pressure transmitter with PUR cable mini-GoPLe Hydrostatic pressure transmitter with PUR cable FROG / mini-FROG Float switch with micro switch DolpHin Unique loop-powered radar CaNaRy Hydrogen sulphide meter with interchangeable measurement cell PUMA Universal compact single-pump controller PUMA TWIN Universal compact 2-pump controller SPIDER Unik pumpestyring med for-programmerede funktioner SPIDER I/O-modul Various signals - more possibilities EAGLE HMI III Color touch-sensitive HMI display - graphic...

GoPLe is used for level measurement in drinking water and sewerage water systems. ACOWA mini-GoPLe is used for level measurement in water wells. GoPLe is synonymous with high reliability as well as stability in level measurements. It measures by using ceramic capacitive measurement principals, and upon submersion, converts the liquid level to a 4-20mA current envelope. ACOWA mini-GoPLe equals high reliability and stability in level measurements. Signal from mini-GoPLe is standard 4-20mA but can be offered as both 0-10V DC, 0-5V DC or Modbus signal. GoPLe is delivered in two measurement ranges:...

FROG/mini-FROG TECNICAL SPECIFICATIONS: FROG and mini-FROG are standard float switches with a micro switch for either a Normally Open (NO) or a Normally Closed (NC) status signal. FROG is delivered in versions with a 10m or 20m fixed-mounted high-flexibility PUR cable - and mini-FROG is delivered with a 5m PUR cable. A mounting bracket is included in both versions. Both products are used as a high-water level alarm in pump stations, low water level alarm in clean water tanks, water on floor alarm, as well as a controlling switch for pumps among many other functions. For FROG and mini-FROG a counterweight...

DolpHin is an 80 GHz compact radar with built-in Bluetooth and 4/20 mA loop-powered signal. Due to its compact size and narrow measuring range, flexible installations are ensured without interferences. The CaNaRy hydrogen sulphide measurer has been developed with a robust design for mounting in pump stations, building structures and similar. DolpHin has a boot time of less than 10 seconds which makes it ideal for overflow d etection when connected to equipment like the GEKKO battery-powered data logger. Also, DolpHin is suitable for measurements in areas with condensation, build-up, or airy solids...

PUMA TWIN PUMA pump control is a universal compact single-pump controller with communication capabilities, managing both 1-phase and 3-phase pumps up to 12A (5.5KW). Building upon the design of PUMA pump control, PUMA TWIN offers enhanced functionality as it is a compact 2-pump control system with communication capabilities. This includes a built-in contactor for operating 2 pumps, each with a capacity of up to 5.5KW / 12Amps. In addition, PUMA TWIN has a unique feature for current measurement on all three phases for both pumps, ensuring that pumps disconnect in case of fault current. PUMA measures...

SPIDER I/O-modul SPIDER is a universal RTU-device with standard functions for: • Pump control • Data gathering • Alarm management • Ground water management If several signals need to be connected to a SPIDER pump management system, then the S PIDER I/O expansion module can be used. By using this module, the SPIDER pump management system becomes even more flexible and can gather several operation and alarm signals. SPIDER is produced and developed in Denmark. The hardware and software design is based upon many years of experience with SRO components. SPIDER complies with all specifications for...

The visualization of operating data and parameters requires a comprehensible display. GEKKO data logger has a robust industrial design with an IP-67 classification. It can be powered by 2 lithium batteries or an external 12-30V DC power supply. EAGLE HMI is designed for modern pump stations where important data must be easily accessible and comprehensible. EAGLE HMI is built upon many years of experience with HMI designs that are easy to use and provide a good overview of the process. The EAGLE HMI display has a 7” widescreen format with high resolution, touch-sensitivity and color, as well as...

FireFly is designed to use as a simple alarm device according to the term “The local red the alarm lamp has become intelligent”. ACOWA SCADA is developed in cooperation with Schneider Electric and consists of 6 standard packages. The system is an object-oriented SCADA system that can communicate with over 90 different hardware manufacturers. FireFly is an intelligent battery-powered or fixed 3V DC alarm unit intelligent alarm unit that can replace the existing red alarm light, so pump alarms and high-water lashes are sent directly to the SRO system via Sigfox communication. FireFly comes with...

Acowa HiVe Acowa HiVe Acowa HiVe is a comprehensive program that merges both data processing and visualization capabilities. It communicate directly with ACOWA units and can convert existing historical data from the user’s own SCADA system, producing valid flow calculations across all pump stations and overflows. These valid flow calculations can then provide the user with the following: • Capacity calculations at all existing pump stations with historical data • Inlet profiles at all existing pump stations with historical data • Overflow calculations for all existing pump stations and overflow...

About ACOWA There are many accessories available for the ACOWA products which enables ACOWA product to be even more flexible. ACOWA was established in 2014 by people with vast experience in the water and sewerage branch. These accessories include antennae for SPIDER, GEKKO and PUMA, current coils for SPIDER pump management, as well as counterweights for FROG. It is also possible to connect an energy meter via MODBUS to SPIDER. ACOWA has its headquarters on Samsoe, but components are distributed worldwide from its stock located in Roskilde. Right from the beginning ACOWA has had a great focus...