- Catalogs
- ACMO S.p.A.
- ACMO_k17b_711-1
ACMO_k17b_711-1
ACMO_k17b_711-1
The document outlines the specifications for an auto-cleaning flow limiter, wafer type with multiple rings. It is designed for use in irrigation systems and is available in sizes DN 150 to DN 300. The flow limiter is constructed from carbon steel (S235JR EN 10025) with components made from brass (CuZn40Pb2 EN 12164), rubber (NBR EN 681-1), and stainless steel (AISI304 A2 EN 10088-1). The epoxy coating provides protection up to a maximum operating temperature of 50°C.
The document specifies the accuracy of the flow limiter as ranging from +0 to +20% with a maximum pressure differential (ΔPMax) of 5 bar. The standard range for single ring modules is between 24 and 60 liters per second.
The materials used comply with various standards, including EN 10025 for carbon steel, EN 12164 for brass, EN 681-1 for rubber, and EN 10088-1 for stainless steel.
It is recommended to adhere to the specified operating conditions and dimensions to ensure optimal performance. The document also includes a head loss diagram to assist in understanding the flow rate and pressure loss relationship.
The document provides a table of dimensions and flow rates for different DN sizes, indicating the standard execution for each size. A head loss diagram illustrates the relationship between flow rate percentage and head loss, aiding in system design and analysis.
Catalog excerpts
KAT 17-B | IRRIGAZIONE / IRRIGATION / IRRIGATION LIMITATORE DI PORTATA AUTOPULENTE INTERFLANGIA LUCI MULTIPLE AUTO CLEANING FLOW LIMITER WAFER TYPE MULTIPLE RINGS LIMITEUR DE DEBIT AUTONETTOYANT TYPE SANDWICH AVEC MODULES COMBINES DIREZIONE DEL FLUSSO FLOW DIRECTION DIRECTION DU FLUX LE FOTO HANNO CARATTERE PURAMENTE INDICATIVO PICTURES ARE PURELY FOR ILLUSTRATIVE PURPOSES LES PHOTOS SONT UNIQUEMENT A TITRE ILLUSTRATIF DIAGRAMMA PERDITE DI CARICO HEAD LOSS DIAGRAM DIAGRAMME DE PERTES DE CHARGE 60 55 50 MATERIALI / MATERIALS / MATERIAUX ITEM DENOMINAZIONE DESCRIPTION DESCRIPTION MATERIALI MATERIALS MATERIAUX NORME STANDARDS NORMES CORPO BODY CORPS ACCIAIO AL CARBONIO CARBON STEEL ACIER AU CARBONE PIATTELLO PLATE PLAQUE OTTONE BRASS LAITON RONDELLA MODULANTE ADJUSTING WASHER RONDELLE MODULANTE GOMMA RUBBER CAOUTCHOUC VITE DI FISSAGGIO FIXING SCREW VIS DE BLOCAGE ACCIAIO INOX STAINLESS STEEL ACIER INOX PORTATA / FLOW RATE / DEBIT EN % DIMENSIONI / DIMENSIONS / MESURES PESO WEIGHT POID * [kg] GAMMA MODULI / RANGE RINGS / GAMME MODULES [l/s] 24 * DIMENSIONI INDICATIVE / INDICATIVE DIMENSIONS / MESURES INDICATIVES RIVESTIMENTO / PROTECTION EPOXY / REVETEMENT EPOXY 250 micron GAMMA MODULI STANDARD IN l/s (MODULO SINGOLO) RANGE STANDARD RING IN l/s (SINGLE RING) GAMME STANDARD DES MODULES EN l/s (MODULE SIMPLE) 24-30-34-40-42-48-50-56-60 l/s PRECISIONE: da +0 a +20% ΔPMax 5bar ACCURACY: from +0 to +20% ΔPMax 5bar PRECISION: de +0 à +20% ΔPMax 5bar UNITÀ DI MISURA: mm / UNIT: mm / UNITE DE MESURE: mm □ ESECUZIONE STANDARD / STANDARD EXECUTION / EXECUTION STANDARD TEMPERATURA DI UTILIZZO / OPERATING TEMPERATURE / TEMPERATURE D’EMPLOI T.MAX.: 50°C CON RIVESTIMENTO EPOSSIDICO / EPOXY PROTECTION / PROTECTION EPOXY AC.MO S.r.l. si riserva il diritto di apportare modifiche anche senza preavviso, al fine di un miglior standard qualitativo. È proibito l’uso non autorizzato delle specifiche tecniche. AC.MO S.r.l. reserves the right to modify the specifications and data contained in this catalogue without prior notice, in order to improve its quality standards. Non authorized use is forbidden. AC.MO S.r.l. se réserve le droit de modifier les spécifications et les données contenues dans ce catalogue, même sans préavis, afin d’améliorer ses normes de qualité. L’utilisation n
Open the catalog to page 1All ACMO S.p.A. catalogs and technical brochures
ACMO_k01e_27-28-32-33-34-35-3610 Pages
ACMO_k06a_600-601-6024 Pages
ACMO_k10a_2000-2010-20166 Pages
ACMO_k17a_7111 Page