Specifications:
The document describes a solenoid valve, specifically a 2-way normally closed direct acting poppet type. The valve body and armature tube are made of brass, while the plunger and core are made of EN 1.4106, and the springs are made of EN 1.4310. The seal material is FPM. The valve has a maximum allowable pressure of 50 bar and can handle fluid viscosities up to 25 cSt. It operates in ambient temperatures ranging from -10°C to +80°C, depending on the coil used. The valve can be mounted in any position.

Technical Data:
The connection orifice is 1/8” with a diameter of 1.5 mm and a flow rate of 0.06 m3/h. The differential pressure ranges from 0 to 14 bar. The nominal power for AC is 3 VA and for DC is 12 VA, with inrush and holding power of 8 VA and 6.5 VA respectively. The coil temperature range is from -10°C to +140°C.

Construction and Features:
The valve features Class H insulation with voltage tolerance for AC at +6% to -15% and for DC at +10% to -5%. It has a protection class of IP65 with a connector fitted and IP00 without. The valve is designed for continuous service (ED100%).

Options:
Special coil voltages and powers are available. The valve can operate on both alternating current (50/60Hz) and direct current, with various voltage options available. Electrical connections are made via connectors, with specific codes provided for different configurations.